Last Updated: 8th May 2018 (over 4 years ago)
BSc Electronics & Instrumentation
— Jun 2010
Produce daily, weekly & monthly maintenance reports for PM & CM. maintenance.
Produce Shutdown reports.
Making work orders and distribute in Technicians.
Attend weekly meeting with Maintenance Manager & briefing maintenance schedule.
Maintain Calibration reports of instrument.
Coordinate with third party for the calibration of all instruments calibrator like temperature calibrator pressure calibrator etc. analyser calibration multi meter volt meter O2 analyser.
Responsible for making schedule for third party calibration & ensure all calibration done by timely.
Maintain calibration record of all related instrument.
Inspection of new arrival spare parts & coordinate with warehouse supervisor.
Maintaining man hours report.
Site visits during Shutdown & corrective maintenance.
Making move order for spare parts from the ware house.
Making time sheets for department.
Carries out preventative maintenance and repairs on a wide range of plant Instrumentation equipment by identifying the cause of faults and rectifying by repair on site or by replacement and/or workshop repair. Works according to all safety regulations and follows an established pattern of work.
Attends a safety talk in the beginning of the day with his assigned Group to discuss SHE planned activities and plant impact on personal safety & health. Attend weekly department SHE meeting.
Attends his Group SHE monthly meeting and actively contributes to the agenda of every safety meeting. The agenda includes various safety topics meeting requirements.
Fully familiar with his area High Potential Hazards, Emergency Response strategies.
Ensures all people working in his area including contractors are equipped with right tools, equipment to perform their task safely.
Conducts Personnel Behaviour Observation (PBO) as per schedule.
Communicates the PBO findings to his supervisor and shares it with his colleagues.
Ensure if all area work activities are performed safely. At the end of each maintenance activity, check the area for housekeeping.
Be aware of Environmental requirements for the area. Report any spills and leaks in his area. Make proper disposal of generated waste.
Must be fully familiar and qualified on all Safety Standard Procedures.
Prepares his work place and equipment and Permit to work. Physically check the job site, before signing any work permit.
Reports all Near Misses & Accidents.
Participates in Accident / Incident Investigation Committees as required.
Ensure to read/write the daily activities in the maintenance logbook.
Follow maintenance planning activities through Maintenance system.
Inspection Cleaning and Maintenance of Pressure Transmitter Impulse line of Steam Boiler (Dig logging).
Inspection cleaning & calibration of Analysers like PH, conductivity, stack O2,SO2,TOC,Silica,Polymer and chlorine analysers,
Calibration of pressure gauge, Temperature gauge.
Maintenance of spark detector, Igniter and Flame detector.
Maintenance of pressure, temperature and level switches.
Maintenance of Limit switches.
Maintenance of pressure transmitter level transmitter and flow transmitter.
Calibration of pressure, flow and level transmitter.
Stroke test of control and on off valves.
Calibration and functional test of control, on off, MOV valves.
Maintenance of analysers filters.
Maintenance of Emergency water drains EWD.
Maintenance Zirconia Analyser.
Calibration of analysers,