A Senior Electrical / Instrumentation Engineer


Last Updated: 13th May 2018 (over 4 years ago)

Address
United Arab Emirates

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Degree

Languages
Arabic, English

Summary

With more than 15 years’ experience design/Installation/testing and commissioning of all electrical works in the projects including 7 years in UAE with multinational organizations and contracting companies. Hold key tools to represent developers and investment groups, supported by strong relations and contacts with key persons in UAE.
Particular experience in Local Authorities regulations and international standards

Experience

1. Pure Water technology LLC.
Senior Electrical / Instruments engineer

   Nov 2012
— Current

Current Projects Involved:
- Design & Construction for Sila Waste Water Treatment Plant Expansion and External Sewer Work for Sila Emirati Housing- Project No. ADSSC-O11014- Done
- Upgrade Infrastructure in Al Quoa, Wadi Al Falie & Al Hayer Remote Area
In Al Ain - Project No. ADSSC-O12097-Done
- Miscellaneous Works related to development projects in Abu Dhabi Emirate, Phase-4 Network, WWTP Capacity Enhancement at Madinat Zayed –
Project No. ADSSC O-11542- On going
Main Responsibilities:
- Design for Single line Diagrams for the waste water treatment plant / pumping station
- Establish Electrical Calculation for Load schedule, Transformer and Generator Sizing,
Cable Voltage Drop with particular sizing and selection and also for Power Factor Sizing according to project specification and authorization regulation plus international standards
- Completion for Process Design including P & ID, Detailed Design Report and project
Control Philosophy including HAZOP Studies
- Completion for Civil Outline/GA drawings, Plant Layout, Cables Rout, instrument
Hookup Drawings
- Completion for Design of Lighting (Internal & External) and small power system
Including detailed feeding circuits with related DB schedules
- Establish for all detailed design electrical Shop drawings including lighting and small
Power, fire alarm, telephone system, earthing and lightning protection, cable routing
With full coordination with MP Drawings and HVAC
- Create control / instrument cable schedule and interconnection loop diagrams
- Completion of all electrical technical material submittals (Selection for MCC’s, power factor correction panel, Cables, Cable accessories, Cable trays, Lighting and small power with wiring accessories, instruments, earthing and lightning protection material) and all related method statement for installation with safety procedures
- Establish the general architectural schematic diagrams for PLC / SCADA system and prepare the control system material submittal with system integrator
- Establish over all testing and commissioning plan for completion and handing over procedures. Arrange FAT/ITP/ITR documents and attend with the engineer/client for all electrical and control system facilities
- Full coordination with documents controller/QA & QS engineer to estimate and finalize all time and work progress schedules plus and design submission follow up log sheets and estimate all variation works and submit to the engineer/client.
- Prepare all documents/design drawing to ADDC/AADC for permanent/temporary power connection and follow up till final power release
Site Work Responsibilities:
- Installation, testing, commissioning with handing over electrical works
- Guide and supervise all installation/testing of electrical facilities (MCC’s, Capacitors panels, PLC & SCADA, Cables, Cable trays, lighting and small power accessories, HVAC systems, junction boxes, local control panels with complete termination and connection
- Installation and connection for different kinds of instruments (ultrasonic, hydrostatic level sensors and transmitter. Electromagnetic flow meters. Analyzers transmitters such as pH, DO, Chlorine. Pressure transmitters. Level/flow/pressure switches)
- Present all related IR’s, RFI, Work permits to the engineer/clients/O &M with related justification and clarification reports.
- Preparing all testing and commissioning plan and handing over documents and submit all related as built drawings and O & M Manuals to the engineer/client.

2. Metito Over Seas. LLC-UAE
Senior Electrical / Instruments engineer

   Apr 2011
— Nov 2012

Projects Involved:
- Khalifa port industrial zone (KPIZ) WWTP with 4 pumping stations-(Abu Dhabi)
With client ADPC and project management BECHTEL
- International City Swage PS (Dubai) – Al Nakheel
- Sky Courts Towers WWTP –MBR (Dubai) – Sky courts
- Northern cement industries company – RO Plant (Saudi Arabia)
- Al Khor WWTP expansion – Phase 2 with KAHRMA (Qatar)
Main Responsibilities:
Design for Single line Diagrams for the waste water / water treatment plant /R.O/ sewage pumping stations
- Establish Electrical Calculation for Load schedule, Transformer and Generator Sizing
Cable Voltage Drop with particular sizing and selection and also Power Factor Sizing according to project specification and authorization regulation plus international standards
- Completion for Process Design including P & ID, Detailed Design Report and project
Control Philosophy including HAZOP Studies & Design Basis Report
- Completion for Civil Outline/GA drawings, Plant Layout, Cables Rout, instrument
Hookup Drawings
- Completion for Design of Lighting (Internal & External) and small power system
Including detailed feeding circuits with related DB schedules
- Establish for all detailed design electrical Shop drawings including lighting and small
Power, fire alarm, telephone system, earthing and lightning protection, cable routing
With full coordination with MP Drawings and HVAC
- Create control / instrument cable schedule and interconnection loop diagrams
- Completion of all electrical technical material submittals (Selection for MCC’s, power factor correction panel, Cables, Cable accessories, Cable trays, Lighting and small power with wiring accessories, instruments, earthing and lightning protection material) and all related method statement for installation with safety procedures
- Establish over all testing and commissioning plan for completion and handing over procedures. Arrange FAT/ITP/ITR documents and attend with the engineer/client for all electrical and control system facilities
- Full coordination with documents controller/QA & QS engineer to estimate and finalize all time and work progress schedules plus and design submission follow up log sheets and estimate all variation works and submit to the engineer/client
- Prepare all documents/design drawing to ADDC/KAHRMA for permanent/temporary power connection and follow up till final power release
Site Work Responsibilities:
- Follow up all Installation, testing, commissioning with handing over electrical works
- Supervise all installation/testing of electrical facilities (MCC’s, Capacitors panels, Cables, Cable trays, lighting and small power accessories, HVAC systems, junction boxes, local control panels with complete termination and connection
- Installation and connection for different kinds of instruments (ultrasonic, hydrostatic level sensors and transmitter. Electromagnetic flow meters. Analyzers transmitters such as pH, DO, Chlorine. Pressure transmitters. Level/flow/pressure switches
- Follow up all submitted IR’s, RFI, Work permits to the engineer/clients/O &M with related justification and clarification reports.
- Follow up all submitted testing and commissioning and handing over documents and submit all related as built drawings and O & M Manuals to the engineer/client.

Metito Over Seas. LLC-EGYPT
Senior Electrical engineer

   Aug 2008
— Apr 2011

Projects Involved:
- Extension of Embaba WTP- Phase 2-Cairo (200,000 m^3/day)
- Extension of Al Amerya WTP- Phase 2-Cairo (200,000 m^3/day)
- Extension of Al Khanka WTP- Phase 2-East Cairo (34,000 m^3/day)
- Extension of Al Badrashen WTP- Phase 2-South Cairo (34,000 m^3/day)
- Extension of Ibashdat/Bani Amer WTP- Phase 2-Upper Egypt (24,000 m^3/day)
- 6th October Waste Water Pumping Station – West Cairo
Main Responsibilities:
- Design for Single line Diagrams of the water treatment plant / sewage pumping station
- Establish Electrical Calculation for Load schedule, Transformer and Generator Sizing
Cable Voltage Drop with particular sizing and selection and also Power Factor Sizing according to project specification and authorization regulation plus international standards
- Completion for Civil Outline drawings, Layout, Cables Rout/MV Cables corridor
- Completion for Design of Lighting (Internal & External) and small power system
Including detailed feeding circuits with related DB schedules
- Establish for all detailed design electrical Shop drawings including lighting and small
Power, earthing and lightning protection cable routing with full coordination with MP
Drawings and HVAC
- Create control / instrument cable schedule and interconnection loop diagrams
- Completion of all electrical technical material submittals (Selection for MCC’s, power factor correction panel, Cables, Cable accessories, Cable trays, Lighting and small power with wiring accessories, instruments, earthing and lightning protection material)
- Establish over all testing and commissioning plan for completion and handing over procedures. Arrange FAT documents and attend with the engineer/client for all electrical and control system facilities
- Prepare all documents/BOQ and drawings for project tendering stage
Site Work Responsibilities:
- Installation, testing, commissioning with handing over electrical works
- Guide and supervise all installation/testing of electrical facilities (MV Switch gear, MV Motors(600 kw/11 KV), MV Auto Transformers with Built in Capacitor Bank, LV Switch boards & MCC’s, Local Control panels, Filter Control Desks, Motorized Valves/Penstocks Control Panels, Cables, Cable trays, lighting and small power accessories, HVAC systems, junction boxes with complete termination and connection
- Preparing all testing and commissioning and handing over documents and submit all related as built drawings and O & M Manuals to the engineer/client.

Ad
Ad
Ad