Robin Resume


Last Updated: 12th July 2017 (over 5 years ago)

Address
United Arab Emirates

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
25 to 34

Qualification Level
Degree

Languages
English, Hindi

Summary

• B.Tech. (Mechanical Engineering) with nearly 9 years experience in Mechanical Maintenance & Operations from conceptual studies and FEED to EPC and EPCM phases.
• Currently working with SPEED TECHNICAL SERVICES LLC, Abu Dhabi as Mechanical Engineer
• Proficiency in managing maintenance of various rotating equipments & utilities for reducing downtime and enhancing operational effectiveness of equipments
• Adept at handling installation & commissioning activities involving resource planning, in-process inspection, team building and co-ordination with internal / external parties.
• Familiar with Mechanical Codes and Standards and also proficient with Fire Fighting Equipments, Personal Protective Equipments (PPE), Housekeeping, Work Permits, Confined Spaces, Emergency Handling & First Aid.
• Practises and also enforces project Health Safety and Environmental (HSE) Standards through out the entire project cycle and also familiar with Hazard Signs
• An effective communicator with excellent personnel management & problem solving skills

Education

PONNAIYAH RAMAJYAM INSTITUTE OF SCIENCE & TECHNOLOGY
B.Tech in MECHANICAL ENGINNERING

   Aug 2004
— May 2008

Experience

SPEED TECHNICAL SERVICES LLC
MECHANICAL ENGINEER

   May 2015
— Current

• Assisted FEED & EPC execution team to develop technical specifications, material requisitions, and technical evaluation of bids and also supported to carry out vendor drawings/documents review for rotating equipment such as pumps, compressors, turbine, gear boxes, agitators and package equipment.
• Installs, removes, inspects and repairs mechanical spare parts like bearings, seals on typical mechanical equipment. Performs and gives directions to crews during major overhaul of gas turbines with or without external contractors and vendors.
• Inspect and diagnose faults on major equipment, checking for corrosion, bent, wear or cracked parts.
• Carry out preventive and defect maintenance of major equipment.
• Reinstall, repaired units on locations and run off-load and stream tests to ensure proper operation. Check equipment and machinery for over-heating and leaks, and ensure that all safety devices are functioning normally.
• Ensures use of proper tools and tackles on the job by assigned crews.
• Executed troubleshooting of the lube oil and hydraulic circuits using P&I Diagrams
• Responsible for recording daily maintenance work log in MAXIMO
• Supervised commissioning activities that included witnessing the alignments of pumps and compressors
• Managed workshop operation on boring, lathe and milling machines and dimensional inspection and run out.
• Monitored installation, commissioning and start up of the plant specific rotating equipment and machinery and was also responsible for reporting the test results and findings through the applicable systems
• Provided post commissioning feedback on engineering reviews, mechanical discipline related technical specifications, design drawings, layout plans, data sheets, project procedures, execution methodologies, and implementation schedule, SMP and vendor technical information.
• Monitored reliability and quality assurance of rotating equipment during field inspection, shop testing, repairing, overhauling and troubleshooting.
• Witness critical rotating machinery repair and overhauling activities, includes providing direct guidance and countermeasure on findings.
• Prepare new maintenance procedures, method statement for new activities and schedule long term maintenance activities as per plant shutdown schedules.
• Responsible for identifying bad actor/poor operating conditions, maintain equipment history records, schedules and check-lists and provides technical advice to Plant operation and maintenance Team on repair and overhaul requirement and recommendation.

VENTURE ENGINEERING SERVICES & OIL FIELD MAINTENANCE
MECHANICAL MAINTENANCE SUPERVISOR FOR ROTATING EQUIPMENTS

   Jan 2013
— Apr 2015

• Anchoring commissioning, preventive and corrective maintenance planning and scheduling for rotating equipment and also managing 5 gas turbines (HITACHI) which are in operation at the job site.
• Responsible for overseeing contractor maintenance works
• Steering initiatives for developing effective maintenance strategy with Planning department to support Oil, Steam Power and Water Process
• Administering the activities of 50 professionals comprising of HSE and QA/QC, Planner, Inspection Engineer, Supervisors, Mill Wrights, Machinist, Rotating Equipment Technicians and Fitters
• Overseeing removal and inspection of piston rings, rider rings, cylinder liners, main bearings, connecting rods and lube oil system and also responsible for inspecting the alignment of the gas cooler fans
• Additional responsibilities includes:
o In-charge for overhauling and star-up works of the Reciprocating Compressors 5HHE-VG3, 3HHE-VG4 & 3HHE-VG5 Dresser-Rand and Ingersoll-Rand make
o Deftly handling various small project scopes like changing worn out equipment as Heat Exchangers, Section Bundles, Centrifugal Pumps with new ones and modifying the suction and discharge lines of pumps
o Shutdown Coordinator for planning, directing and coordinating shutdown and start-up works in accordance to the project execution plan
• Involved in overhauling and reconditioning of the component parts of instrument air compressors (both reciprocating and screw type) Ingersoll-Rand make and different types of multi-stage and single stage centrifugal and plunger pumps

SPEED TECHNICAL SERVICES LLC
MECHANICAL MAINTENANCE ENGINEER

   Feb 2009
— Dec 2012

• Assisted FEED & EPC execution team to develop technical specifications, material requisitions, and technical evaluation of bids and also supported to carry out vendor drawings/documents review for rotating equipment such as pumps, compressors, turbine, gear boxes, agitators and package equipment.
• Installs, removes, inspects and repairs mechanical spare parts like bearings, seals on typical mechanical equipment. Performs and gives directions to crews during major overhaul of gas turbines with or without external contractors and vendors.
• Inspect and diagnose faults on major equipment, checking for corrosion, bent, wear or cracked parts.
• Carry out preventive and defect maintenance of major equipment.
• Reinstall, repaired units on locations and run off-load and stream tests to ensure proper operation. Check equipment and machinery for over-heating and leaks, and ensure that all safety devices are functioning normally.
• Ensures use of proper tools and tackles on the job by assigned crews.
• Executed troubleshooting of the lube oil and hydraulic circuits using P&I Diagrams
• Responsible for recording daily maintenance work log in MAXIMO
• Supervised commissioning activities that included witnessing the alignments of pumps and compressors
• Managed workshop operation on boring, lathe and milling machines and dimensional inspection and run out.
• Monitored installation, commissioning and start up of the plant specific rotating equipment and machinery and was also responsible for reporting the test results and findings through the applicable systems
• Provided post commissioning feedback on engineering reviews, mechanical discipline related technical specifications, design drawings, layout plans, data sheets, project procedures, execution methodologies, and implementation schedule, SMP and vendor technical information.
• Monitored reliability and quality assurance of rotating equipment during field inspection, shop testing, repairing, overhauling and troubleshooting.
• Witness critical rotating machinery repair and overhauling activities, includes providing direct guidance and countermeasure on findings.
• Prepare new maintenance procedures, method statement for new activities and schedule long term maintenance activities as per plant shutdown schedules.
• Responsible for identifying bad actor/poor operating conditions, maintain equipment history records, schedules and check-lists and provides technical advice to Plant operation and maintenance Team on repair and overhaul requirement and recommendation.
• Handled corrective & preventive maintenance works for:
o 5 gas turbines (Siemens V94.3A) in operation, Siemens V94.3A each unit producing 250MW
o 2 steam turbines in operation, Siemens 350MW capacity each
o 5 gas turbines in operation, Alstom GT26B each unit producing 250MW
o 3 steam turbines in operation, Alstom 350MW capacity each
o Turbine parameters, collecting and interpretation of spectrum collected with portable analyzers of rotating equipment including Centrifugal Pumps, Flowserve and Air Coolers of heating and cooling medium installations

Ad
Ad
Ad