Electrical Engineer


Last Updated: 31st May 2018 (over 4 years ago)

Address
Philippines

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Degree

Languages
English

Summary

Dear Sir / Madam;

I would like to send my application for the position of "Electrical Engineer" or any position which suits my qualification. I am working for more than 13 years which involves Electrical Design, Engineering, Construction, Pre-Commissioning and Project Management. Please take note that I am available immediately.

I am an Electrical Engineering Professional with experience in electrical engineering, design, drafting, review and checking of electrical drawings for Power, Lighting, Grounding, Area Classification, Electrical Cable Tray, Single Line Diagrams, Connection Diagrams, Block Diagrams, Control Schematics and Material Take-off (MTO), Cable schedule etc. ensuring clarity, completeness and minimal errors in design output and compliance to project specifications, manhour budget and schedule.

I am familiar with the different international standards such as NEC, IEC, BS, ABS, DNV, SOLAS, IEEE and others.

For the complete details of my job experiences, please see attached CV.

I am hoping for your positive response with regards to this matter.

Thank You and Regards;
Redner Africa
+639158183519

Education

Batangas State University
Bachelor of Science in Electrical Engineering

   Jun 1999
— Jul 2004

Graduated with a Degree in Electrical Engineering
Lifetime Member of The Institute of the Integrated Electrical Engineers of the Philippines by passing the Electrical Engineering Board Examinations

Experience

TEEKAY NAVION OFFSHORE LOADING PTE. LTD.
Electrical Engineer (Site)

   Dec 2015
— Jul 2017

Project : GINA KROG FSO
Sembawang Shipyard, Admiralty Road West Singapore 759956

Representing the Owner as Electrical Engineer, my main responsibility is to check the electrical engineering deliverables of the Main Contractor / Shipyard (SEMBAWANG) and Package/Equipment Vendors according to IEC, DNV and TEEKAY standards. Specifically :
• Prepare Voltage Drop Calculation, Cable Sizing Calculation, Breaker/Fuse Sizing Calculation of the MV (11kV) and LV (690V, 400V and 230V) System
• Review and Checking of the Single Line Diagrams, Interconnection Diagrams, Control Schematics, Cable Block Diagrams, Wiring Diagrams, Loop Diagrams, Interface Diagrams, Cable Schedule, Overall Earthing Diagram
• Preparation of Cable Ladder Layout
• Site Inspection, Site Coordination, Construction Progress Monitoring
• Review Instrument Documentations for proper Electrical Interface with regards to PSD, ESD, PCS, Fire & Gas etc
• Coordination with Main Contractor / Shipyard, Construction Department, Commissioning Department etc with regards to Electrical Engineering issues
• Site Support/Supervision with regards to Construction of Electrical Equipment according to approve drawings and standards

DANA PETROLEUM
Electrical Engineer (Site)

   Apr 2015
— Sep 2015

Project : Western Isles Development Project (WIDP) FPSO
COSCO Shipyard, Qidong, Jiangsu 226200, China

Representing the Owner as Electrical Engineer, my main responsibility is to check the electrical engineering deliverables of the Main Contractor / Shipyard (COSCO) and Package/Equipment Vendors according to BS, IEC, DNV and DANA standards. Specifically :
• Prepare Voltage Drop Calculation, Cable Sizing Calculation, Breaker/Fuse Sizing Calculation of the MV (11kV) and LV (690V, 400V and 230V) System
• Review and Checking of the Single Line Diagrams, Interconnection Diagrams, Control Schematics, Cable Block Diagrams, Wiring Diagrams, Loop Diagrams, Interface Diagrams, Cable Schedule, Overall Earthing Diagram
• Review and Checking of Lighting and Small Power
- Cable Schedule, Layout, and Single Line Diagram Discrepancies
- Circuit impedance verification and Short Circuit Calculation
• Review and Checking of Vendor Packages
- Electrical Power Package (MV/LV Switchboards, Lighting and Small Power System, MV / LV Transformers, MV / LV Motors)
- Mechanical Packages (Electrical Content and Interface)
• Review of Design Philosophy :
- Cable Selection Philosophy, Cable Gland Management Procedure, Electrical System Description, General Technical Specification for Equipment
• Review of Safety Automation System (SAS)
- Discrepancies between Power Distribution and Control System (PDCS) Wiring Diagrams and Cabinet GA / Layout, I/O List, SAS Topology
- Electrical Control Typicals for SAS
• Site Inspection, Progress Monitoring, Red Line Mark Ups for As Built Purposes
• Review Instrument Documentations for proper Electrical Interface with regards to PSD, ESD, PCS, Fire & Gas etc
• Coordination with Main Contractor / Shipyard, Construction Department, Commissioning Department etc with regards to Electrical Engineering issues

Siemens Pte. Ltd.
Sr. Electrical Project Engineer

   May 2012
— Oct 2014

Project : ODFJELL # 3 – H3033 (DRILL SHIP – SEMI SUB)
ATWOOD # 3 – H3619 (DRILL SHIP) / ATWOOD # 4 – H3622 (DRILL SHIP)
60 Macpherson Road, The Siemens Center, Singapore 348615

• Manage all aspects of Electrical Engineering in the design of (1) Low Voltage (690V, 440V and 230V ) Electrical Power Distribution System, Switchboard, and Intelligent MCC, (2) MV Dry Type Transformer
• Supervise contractor’s/vendor’s execution of engineering design, equipment fabrication and testing
• Coordinate with customers, suppliers/vendors, principals, surveyors and 3rd party inspectors on project requirement
• Organise production documents packages for internal use and customers
• Assist factory/vendors during engineering, production, internal testing of equipment, Factory Acceptance Test (FAT), and Site Acceptance Test (SAT)
• Monitor and expedite module fabrication, inspection, supply and delivery to the Construction Site, ensuring technical, quality, cost and schedule issues are properly resolved
• Plan and control project schedule and costing as per contractual delivery time and cost budget established for the projects
• Raise project variation to customer and negotiate change orders
• Act as a single contact with customer and vendors during project execution and consolidate technical and commercial issues for coordination
• Support the Client Completions Team ensuring punch listing and pre-commissioning and commissioning activities are carried out effectively and Handover documentation delivered as needed

Kongsberg Maritime Engineering
Electrical Engineer

   Sep 2010
— May 2012

Project : BW JOKO TOLE (FPU)
81 Toh Guan Road East #04-01, Secom Center Singapore 608606

• Prepare Voltage Drop Calculation, Cable Sizing Calculation, Breaker/Fuse Sizing Calculation, (MARINE SIDE)
o MV (6.6kV) and LV (440V and 220V) System
• Prepare Single Line Diagrams, Interconnection Diagrams, Control Schematics, Cable Block Diagrams, Wiring Diagrams, Loop Diagrams, Interface Diagrams, using AutoCAD LT 2011 for the following Electrical Items:
o 6.6kV MV Switchgear
o 440V Normal LV Switchgear / 440V Emergency Switchboard / 440V Essential LV Switchgear
o UPS System
o 440V Laundry Distribution Board / 440V Workshop Distribution Board / 440V Galley Distribution Board
o 220V Lighting and Small Power Distribution Boards
o HP Compressor / LP Compressor (by SOLAR)
o SUBSEA System
o LIFEBOAT and FRC System
o Helicopter Re-Fuelling / De-Fuelling System
o Navigational Aids System
o Lighting and Small Power
• Prepare General Arrangement Drawing and/or Layout Drawing, specifically for:
o MV (6.6kV) and LV (440V and 220V) Switchboards
o Lighting and Small Power Distribution Boards
o Hazardous Area
o Engine Room Cable Ladder
o Multi Cable Transit
o Electrical Equipment for Switchgear Room, Engine Control Room
o Earthing System
• Prepare Typical Installation Details, specifically for:
o Earthing System
o Motor Local Control Station
• Prepare Lighting MTO, Lighting and Small Power Load Balancing
• Review / Check Instrument Department’s Termination / Block Diagram for the proper Electrical Interface with regards to ICSS (PSD, ESD, PCS, Fire and Gas, etc)
• Assist in the preparation of Electrical Cable Schedule, Protection Devices Setting Table
• Review Vendor Documents and incorporate all the necessary information to the Company’s Electrical Deliverables
• Perform progress reporting on design and drafting activities
• Ensure consistency and integrity of electrical design throughout the project and reviewing design for logic, functionality and completeness

CB&I LUMMUS PTE LTD
Electrical Engineer II

   Aug 2008
— Sep 2010

Project : TUPI (FPSO)
2 Ayer Rajah Crescent, Singapore 139935

• Review Vendor Documents and incorporate all the necessary information to the Company’s Electrical Deliverables
• Prepare Voltage Drop Calculation, Cable Sizing, Cable Schedule for the different Modules of the FPSO Vessel
• Prepare Single Line Diagrams, Interconnection Diagrams, Control Schematics, Cable Block Diagrams, Wiring Diagrams, Interface Diagrams of MV/LV Switchboards, Distribution Boards, Electrical Panels etc, using the latest version of AUTO CAD
• Coordinate with other disciplines, vendors, clients with regards to Electrical Concerns of the Project

JGC Philippines Inc.
Electrical Engineer I

   Jun 2005
— Aug 2008

Project : Various on-shore Projects (EPC)

• Equipment Modeling of the Lighting System of the Project using PDMS (AVEVA) software
• Design of Electrical Drawing specifically: Lighting, Power, Grounding, Area Classification, Connection Diagram, Single Line Diagram, Electrical Cable Tray, Material Take-off
• Preparation of Drafting works related to P&ID Diagram, Graphics Diagram
• Preparation of Multi Cable Transit Arrangement
• Preparation of MTO for Electrical Cables
• Attend to the activity of Subcontractor with regards to Electrical System Construction, Pre-Commissioning and Commissioning specifically on the field of Grounding, Lighting, Power, and Substation
• Witness Electrical Test Inspection as per Client Specification and Standards specifically; (1)Insulation Resistance Test for motors, generators, and LV/MV cables, (2) Winding Resistance Test, (3) Phase Rotation Check etc etc
• Prepare Cable Pulling Schedule of Electrical System
• Coordination with Client, Subcontractors, Vendors and other Disciplines with regards to the Electrical System of the Plant
• Responsible for electrical construction’s progress monitoring.

EPSON PRECISION PHILIPPINES INC.
Staff Electrical Engineer

   Aug 2004
— Jun 2005

• Responsible for the Quality Assurance of the “Incoming System” of the Company
• Assist the supervisor/Assistant Supervisor on the control , evaluation , and inspection of parts and evaluation sample for approval

Search Jobs by Industry

Ad
Ad
Ad