sr production Operator


Last Updated: 9th April 2018 (over 4 years ago)

Address
Iraq

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Degree

Languages
English, Hindi

Summary

• Lead production operator is in charge of the production operators and within his area of influence and reporting directly to production supervisor. To ensure that all production assets associated with plant are operated in safe and efficient manner, in line with agreed plant operating philosophies and in line with production procedures and practices.
• Make regular routine checks of all Equipment and Units to ensure that they are functioning correctly in accordance with Standard Operating Procedure.
• Assist production supervisor in preparing detailed shutdown and start-up plans.
• Identify frequent tripping areas and prepare, if required Management of Change or Facility Change Proposal
• Identify opportunities to optimize and improve in the DCS as well as in the field.
• Supervise and develop others to competently operate the plant, ensure operators are fully aware of their key responsibilities and the effect of non-optimal operation of the plant on the overall production
• Daily Checking and recording of log sheet parameters such as pressure, temperature, level, flow of water, oil and gas.
• Informing abnormal plant operational conditions to Supervisor and generating reports.
• Report at Equipment and Instrument defects and leaks immediately to my supervisor and take possible corrective action.
• Daily Reporting of shift activities to supervisor and maintaining log book & various registers
• Assist in carrying out the Routine Weekly Run Tests of Equipments like Emergency Diesel Generator diesel and Electrical Fire Pumps. etc.,
• Unload Chemicals into Tanks for Injections, Start and adjust the Flow Rate of Chemical Injection Pumps as required.
• Collect Oil, Gas, and Water Samples and measure the Water Cut in Oil, Salt Concentration in the Produced Water and pass the samples to the Laboratory for Analysis.
• Be aware of safety rules and regulations, Emergency response, medieval activities and all safety precautions relevant to Plant facilities.
• Initiate and lead Fire Fighting or other emergency actions in my area until taken over by a higher authority.
• Supervise and develop others to competently operate the plant, ensure operators are fully aware of their key responsibilities and the effect of non-optimal operation of the plant on the overall production
• Discuss activities with permit applicant, sign PTW as responsible supervisor, ensuring updating of the permit tracking system and discuss high risk activities with production supervisors and production operator.
• Maintaining good housekeeping.
• Making detailed daily production report.
• HSE systems are in place before starting a job, ensure proper use of tools and PPE, conduct regular site visits, ensure competence of workers and awareness of relevant operational/HSE procedures, advice workers on potential hazards, check safety equipment, notify management of unsafe working conditions, report and investigate HSE incidents, participate in facility inspections and HSE meetings.

Education

GOMATHI AMBAL POLYTECHNIC
MECH TECH

   Jul 1994
— Jun 1998

Having a sound knowledge of Commissioning and Pre-Commissioning activities such as P&ID Checking and Line Tracing, Hydro Testing, Blowing, Purging, Inner ting operation for Cryogenic Tanks, Pipeline Flushing and Vessel Cleaning, Punch List Preparing and Checking, Loop Checking, Leak Testing, Control Valve Stroke Checking, Utility Services Providing to the Units one by one, Rotary Equipment’s (Pumps, Blowers and Compressors) Test Run, Carrying out OTP (Operational Test Procedures) with the coordination of other department Crews and Participating as a team member of Start-Up and Shut-Down Activities etc.

Experience

DNO
SR PRODUCTION OPERATOR

   Aug 2009
— Apr 2018

Having a sound knowledge of Commissioning and Pre-Commissioning activities such as P&ID Checking and Line Tracing, Hydro Testing, Blowing, Purging, Inner ting operation for Cryogenic Tanks, Pipeline Flushing and Vessel Cleaning, Punch List Preparing and Checking, Loop Checking, Leak Testing, Control Valve Stroke Checking, Utility Services Providing to the Units one by one, Rotary Equipment’s (Pumps, Blowers and Compressors) Test Run, Carrying out OTP (Operational Test Procedures) with the coordination of other department Crews and Participating as a team member of Start-Up and Shut-Down Activities etc.

Ad
Ad
Ad