MECHANICAL ENGINEER


Last Updated: 29th April 2018 (over 4 years ago)

Address
India

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
25 to 34

Qualification Level
Degree

Languages
Arabic, English, Hindi

Summary

Mechanical Project Engineer/Design/Site Execution/Coordination with total 13 years of experience
10 months of experience in designing of Spring Hanger Supports of Pipe lines
7 years 10 months years of experience in Engineering Design review / project monitoring / resolving site constraints in BOP / utilities / site constrictions of Thermal Power Plants such as water system & treatments, Cooling systems, DM plant, HVAC, Firefighting system, Ash handling, of Thermal Power Plants and Raw Water Intake system with 3 pumping stations and 70km U/G pipe.
Completed engineering discussion at Changchun, China with SEPCO – I, EPC contractor for 3600MW TPP located at Bilaspur, as required close the technical issues on base design & detail design drawings of CHP, AHP, HVAC, Fire protection, Plumbing, Water system, cooling system and Water treatment systems of power plants
International Experience of 3 YEARS 10 months gulf experience as Mechanical Project Engineer / MEP Site coordinator / site execution / testing & commissioning of mechanical equipment’s for 132/33/13.8kV substations (2 projects)

Education

THIRUVALLUVAR COLLEGE OF ENGINEERING & TECHNOLOGY
MECHANICAL ENGINEER

   Aug 2001
— Apr 2005

BACHELOR OF ENGINEERING IN MECHANICAL SPECIALISATION

Experience

ALMASHARIQ TRADING & CONTRACTING COMPANY
PROJECT ENGINEER - MECHANICAL

   Apr 2014
— Feb 2018

Projects Handled:
• 132/33/13.8kV substation at Mokhtarah, Jazan
• 132/33/13.8kV substation at Najran Airport East, Najran
Roles and Responsibilities:
o Responsibility to review design and coordinating with vendor / client / consultant/site in all aspects of completion of Firefighting system, Heating & ventilation and air conditioning systems, Crane and plumbing systems for the delivery of design drawings to site after review and approval as per Standard codes TAC, ASHRAE, NFPA standards
o Responsibility of review of plumbing drawings and design calculations for substation buildings
o Review of small power voltage system-LT (indoor & outdoor) design and drawings.
o Obtaining approval for the drawings & design calculations from client ON time with proper follow ups.
o Monitoring the site progress of HVAC, fire fighting & civil (plumbing) sub-contractors
o Supervision of Erection/Installation and Testing & commissioning HVAC units, Fire fighting system, Crane, water pumps and other MEP equipments
o Actively conducting site progress meeting and actions taken for safety issues to maintain at site and conducting meeting with vendor, consultant and client for solving engineering issues, if any.
o Coordinating with site managers/engineers for smooth progress of construction / erection work at site
o Ensuring the proper safety measures PPE followed during HVAC work / installation at site and ensure proper safe scaffolding provided for the work.
o Managing MEP Labors / supervisors of the project and scheduling day to day activities.
o Coordinating the site activities with all departments, controlling project schedules, follow up of LC openings with commercial departments
o Prepare and review of progress reports for all electro mechanical activities.

KSK ENERGY VENTURES LIMITED
SENIOR ENGINEER - MECHANICAL

   Jan 2009
— Apr 2014

Projects Handled:
• 6x600MW KSK Mahanadi TPP, Chattisgarh.
• 4x135MW, Wardha TPP, Warora
• 43MW TPP, Arasmeta Captive power, Chhattisgarh
Roles and Responsibilities:
o Preparation and review of piping layout, piping design, utility piping, pipe sizing calculation, pressure drop calculations and bill of quantities (BOQ) for Non-IBR Piping.
o Water intake system for Power Plant – design of entire water intake system including DBR, piping layout, pipe sizing, pump sizing, air release valves & valve chamber.
o Review/observe of surge analysis report, CFD analysis & sump model study reports of raw water intake piping & pump stations.
o Review of CW system engineering drawings / documents including CW piping, pipe sizing, pump sizing, etc
o Preparation of engineering drawings like system drawings, flow diagram, P&ID’s for BOP of thermal power plants
o Supervision of erection/installation, testing & commissioning of Water pumps, cooling water systems and complete BOP of thermal power plants.
o Back study of the HVAC and Firefighting DBR and scope of work with required standards like ASHRAE handbook, TAC, NFPA.
o Review of design / drawings related to Chilled water plant (vapor absorption type), Air handling unit (AHU) and water cooled packaged air conditioners for air conditioning and Evaporative cooling unit for ventilation of power plants.
o Review and approval of vendor drawings/documents for Fire protection and HVAC drawings/documents such as layout, Scheme drawings and sizing calculations.
o Review of Hydrogen generation plant drawings / documents.
o Preparation of specifications for pump / pipe line, weighbridge, EOT crane, hoists, etc and review of offers, drawings / details etc.
o Inter disciplinary coordination with other departments and sorting out the engineering related queries raised by site for their further progress of work during construction and commissioning stage
o Conceptual engineering of water systems, land requirement, Chimney sizing, AHP and CHP packages for upcoming projects of M/s. KSK Energy Ventures Limited

HIQ POWER ASSOCIATES PRIVATE LIMITED
PROJECT ENGINEER - POWER PLANTS

   Jun 2006
— Dec 2008

Project Handled
• 15 MW Captive power plant for M/s. Lloyds Steel Industries Limited at Gopani Iron & Power India Limited, Tadali, Chandrapur, Maharshtra.
• 30MW CPP for M/s. Electrotherm India Limited, Kutch, Gujarat
• 30 MW Captive power plant for Lloyds Metals and Engineers Limited, Ghugus
Roles and Responsibilities:
o Preparation and design review of piping layout, pipe sizing and pressure drop calculations, preparation of bill of quantities along-with specifications for utility piping
o Preparation of Plant General Layouts (PGL) and other utility systems, Material handling schematics (fuel and ash)
o Preparation of EOT crane, Electric hoist tender specifications and review/approve of vendor drawings.
o Design of Fire Protection, Ventilation and Air-conditioning systems for Power plants as per TAC, NFPA, ASHRAE and ISHRAE.
o Hydrant System, Spray system, Sprinkler system design for buildings, Transformers and conveyors as per Tariff advisory committee (TAC).
o Air conditioning and ventilation duct sizing design review as per SMACNA standard
o Review of fire protection, ventilation and air conditioning vendor drawings/documents
o Preparation of MIS reports reflecting the engineering status of various stages of project to the Management
o Project Management for implementation of projects within planned schedule. Co-ordination with client & vendor till the commissioning of plant/package.
o Preparation of project procedure manuals, documentation procedures and Project completion report

PIPE SUPPORTS INDIA PRIVATE LIMITED
DESIGN ENGINEER

   Aug 2005
— Jun 2006

Role & Responsibilities:
o Design of Pipe Supports & Spring Hangers, preparing Bill of Materials and purchase orders with respect to stress analysis drawings
o Finalizing the techno commercial offers as a supplier/manufacturer
o Review the technical requirement of client to prepare quotations as a manufacturer
o Follow up with production and quality department ensure the materials will reach client as per the terms and conditions of Purchase Order.
o Preparation of invoices, follow up for payments/cash from clients

Ad
Ad
Ad