Electrical Supervisor


Last Updated: 6th October 2017 (over 5 years ago)

Address
Qatargas Operating Company Limited, Qatar

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
HNC/HND/City & Guilds

Languages
English

Summary

Having efficient knowledge in Refinery, petrochemical and Oil and Gas process plant Offshore/Onshore Over 16 years experience Doing all Electrical equipment Maintenance System

Education

J.K.K. Sampoorani Ammal Polytechnic
Diploma Electrical

   Jun 1999
— Apr 2001

Technical Education
Diploma in Electrical Engineering.
J.K.K. Sampoorani Ammal Polytechnic
Course Duration : 1999 – 2001(3 Years)
(First class with honors 82.2%)
EDUCATIONAL QUALIFICATION

HSC Passed (State Board of Tamil Nadu) - 1999
SSLC Passed (State Board Tamil Nadu)-1997 , India
S.K.V .Higher Sec School ,Kurinjipadi, Dst- 607301
Additional Qualification:

AUTHORIZATION
CompEx Certificate
Senior Authorized Electrical Person (SAEP)
Approved by Raslaffan liquefied natural gas company
RasGas,(Qatar) to apply HV & LV Isolations – lockout/tag-out system
VSD Training provide ABB company (IGBT)

Experience

BP Exploration (Epsilon) Limited
Electrical Lead

   Aug 2016
— Current

Key Responsibilities:
Make sure power supply at Gas turbine are in good condition
Troubleshoot and repair electrical break down as soon as possible
Preventive Maintenance electrical panel and starter panel
Preventive Maintenance transformer 6.6/11/33KV
Test run gen set
Assist visiting engineer inspection HT installation
Supervise contractor do, repair work and /servicing work.
Making planning job for daily electrician works.
Update all electrical PM form.
Inspect all electrical tool contractor need to use in plant
Maintenance experience of Battery Charger System (CEG)
Switchgear SF6, VCB, ACB Voltage 6.6/11/33KV
Switch Racks,
UPS (GUTOR)
Power and Distribution Transformers,
Heat Tracing System (Pentair)
Motors, MCC,
ICCP System,
Submarine Cables
Diesel Generators
Power Generation (Gas turbine) GE
LV/MV Switchgear maintenance (IMCS)
Variable Speed Drive (VFD) AC Drive HMI
Electrical Submersible Pump (ESP)
LV/MV Motor Maintenance and medium voltage, RTU’s, PLC’s
LV/HV Transformer maintenance
UPS / Battery charger Inverter Maintenance
Familiar with all kind of electrical test instrument and equipment
Hazardous area on the Gas plant and good experience on Ex electrical materials
Company based CMMS, ISSOW, SAP, Maximo system,
Offshore wellhead maintenance electrical maintenance
10 years’ work experience on HV/LV switchgear operating & troubleshooting
HSSE Responsibilities:
Involves in scheduled safety walkabout
Assesses the risk of all day to day jobs that is carried out
Develop formal Job Hazard Analysis with all relevant parties for jobs with medium and high risk
Full compliance with Life Saving Rules and Electrical Safety Rules at all times with Zero electrical incident
Ensure all electrical equipment are energy free before releasing to contractors, especially paying attention those with capacitor incorporate in the design.
Senior Authorized Electrical Person (SAEP) up to 33KV, CompEx Certificate

Qatargas Operating Company Limited
Senior Electrical Technician

   Jun 2015
— Dec 2016

General Activities:
* All HSE issues
* Electrical routine, corrective and breakdown maintenance
* Company based CMMS, SAP, Maximo system,
* 10 years at least work experience on HV switchgear operating and troubleshooting
* Good work experience on generation systems and load sharing modules
* Good work experience on generator and transformer protection systems and relays
* Good maintenance experience on LV AC induction motors single
* Variable speed, VFD, motor starters and motor protection systems
* Good maintenance experience on UPS systems, batteries and battery chargers.
* Hazardous area on the Gas plant and good experience on Ex electrical materials.
* Good work experience on electrical equipment commissioning and start up
* Experience on the HV overhead lines and HV distribution systems
* Experience on the heat tracing installation, testing and operating
* Good experience on the electrical isolation procedures for LV and HV equipment
* Working knowledge of maintenance management systems
* Have knowledge / experience of PTW / Control of Work systems.
* Variable frequency drive's (HMI) and motors, HV and LV motors,
* GE Multilin protection relays etc.
* LV/MV Switchgear maintenance (IMCS)
* Electrical Submersible Pump (ESP)
* LV/MV Motor Maintenance and medium voltage, RTU’s, PLC’s

HSSE Responsibilities:
Involves in scheduled safety walkabout
Assesses the risk of all day to day jobs that is carried out
Develop formal Job Hazard Analysis with all relevant parties for jobs with medium and high risk
Full compliance with Life Saving Rules and Electrical Safety Rules at all times with Zero electrical incident
Ensure all electrical equipment are energy free before releasing to contractors, especially paying attention those with capacitor incorporate in the design.
Senior Authorized Electrical Person (SAEP)

Total E&P Qatar Offshore
Senior Electrical Technician

   Apr 2014
— Jun 2015

General Activities:
Working Experience wellhead offshore
Every day Toolbox talk conduct supervisor
Company based CMMS, ISSOW, SAP, Maximo system,
Wellhead supervisor in preparing ESP job plans
Electrical team has good coordination to completed task
Communication to Station Radio Operation
Electrical equipment maintenance and EPS operations on the remote jackets in the
I was working Wellhead 9 slot Jacket, tripod Jacket, Drilling Platform (DP)
ESP Shut in & Startup follows the company procedure Baker Hughes Provide
Maintenance experience Baker Hughes (Centrilift) Schlumberger ESP, VSD (IGBT)
Working Experience Dual Pumping System (Upper- Lower ESP)
Working LEROY SOMER - VSD system
Maintenance experience Step up 415V/1500-5000V and step down6.6KV/415 Transformers for VSD
ICS, GCS type operation interface unit (OIU) to check motor current, voltage, HZ
Carried out Megger test, Winding Resistance test ESP
ESP well kicks Off Operation to assist vendor Baker Hughes (Denial)
Soft Starter (Joslyn Clark)
I have working experience RMU Eaton (MV) switchgear
Baldwin & Francis 415v Distribution MCC
Distribution Transformers 6.6KV/415V (Emirates Transformers)
Chloride UPS
I have working Experience tripod RTU, wind turbine, water turbine, and solar panel
I have basic operation experience well open/close
RTU battery Bank maintenance with Load test

Key Result Areas:

• In charge of electrical maintenance works, which includes, installations, inspection and testing
• Safe Operation for all type of High and Low Voltage Switch Gears with appropriate permit system and safe operating Procedure
• Carried out perform the implementation of these programs in accordance with field operations and MAXIMO CMMS
• Preventive & Breakdown maintenance and Trouble shooting of Electrical switchgears and equipments in petrochemical industries and Gas plants as per safety rules and work permit systems
• Ensure that all equipment is restarted and running efficiently after they have been repaired (Corrective Maintenance) or maintained (Preventive Maintenance)
• Coordinate with technical support, the spare parts, the preparations and documentation up-date and correct storage.
• I have experience LOCK OUT /TAG OUT (LOTO) procedure and AEP certificate also HSE compliance at all stages of the work scope
• Maintain HV/LV motors, control circuit Electrical fault analysis and Trouble shooting
• Trouble shooting for ESP soft starters & circuit breaker control system,
• Energizing and De-energizing procedure of HT/LT Switchgears Motors
• Trouble shooting and maintain SF6,VCB,breaker isolation and de-isolation
• Maintain ESP and Variable frequency Drive (VFD) model IGBT
• Check and fault find IGPT module and capacitor and inductor circuit
• Visual inspection of the VFD and environmental conditions.
• Inspection of the connections and Inspection of the ribbon and fiber optic cables.
• Functional inspection of the fan and cooling system Electrostatic Discharge protected cleaning of the VFD.
• Inspection of the 'emergency stop' circuit.
• Inspection for the prevention of unexpected start-up circuit.
• Inspection and storage of the parameters.
• Functional testing of the VFD under normal conditions.
• Basic measurements with supply voltage.
• Inspection of the VFD spare part inventory with MAXIMO system
• Reforming of the spare module capacitors.
• Check and fault find IGPT module and capacitor and inductor circuit
• Fault finding converter and inverter side ICS & GCS model
• Maintain VSD step up and step down transformers
• VFD requires the same safety and equipment precautions applied to computers and power supplies because of its similarity to both, Keep it clean, keep it dry, and keep the connections tight
• VFDs susceptible to dust contamination, which can reduce airflow and diminish performance from heat sinks and circulating fans.
• VFD components. Check circulating fans for signs of bearing failure or foreign objects.
• voltage measurements while the VFD is in operation with OIU unit,
• Maintain motor vibration and bearing Temperature
• Maintain up to date Technical Knowledge of Electrical Motor Systems, Single Line drawings,
• Preparing Switching program for multiple sequence of switching activities.
• Maintenance procedure HT & LT switchgears motors
• Maintenance battery banks and UPS, battery charger, record battery cell voltage and cell temp
• Performs other similar or related duties such as transporting materials, equipment and parts to different work locations.

Search Jobs by Industry

Ad
Ad
Ad