Electrical and Instrument Engineer


Last Updated: 3rd January 2020 (over 2 years ago)

Address
Ho Chi Minh, Vietnam

E-mail
Locked

Phone Number
Locked

Qualification Level
Degree

Languages
English, Vietnamese

Summary

More than 15 years experience on complex engineering projects in Power and Oil & Gas industrial including Power Plant, Refinery Plant, Marine, Offshore and Industrial Building…Being responsible directly in Engineering, Construction Supervision, QC, Pre-commissioning, Commissioning and project control for electrical, instrument and control system, promotion of strong HSEs cultures. Having extensive knowledge and being familiar with equipment & system such as below:
Electrical
+ Study Report of Load Flow, Short Circuit Current, Large Motor Starting…
+ Relay Protection Setting and Coordination (ABB, Micom Schneider)
+ CT, VT testing, Relay Testing and Re-commissioning and Commissioning
+ Power management system, SCADA,
+ Substation, Power Transformer up to 500KV, HV/LV Switchgear, MCC, VSD, UPS, Battery..
+ Motor, Pump, Fan, Compressor, Heat exchanger…
+ Steam turbine, Gas turbine, Boiler, Generator
+ Lighting and small power, Fire detector and alarm system, HVAC system
+ Cabling and Termination

Instrument: Sizing, Installation, Calibration, Loop Test and Troubleshooting
+ Pressure, Temperature, Flow, Level…Element & Transmitter
+ Control Valves, On/Off valves, Motorize of Valve (MOV), Deluged Valves, Safety Valves…
+ Toxic, Flammable, Fire and Smoke detector, Flame Detector: H2S, CO, H2, Cl…
+ Analyzer: GC, pH, Density, H2, Conductivity, CO, TC, TOC, Moisture…
+ Vibration: Non contact Eddy current, Piezoelectric, LVDT and monitoring system
+ Cabling and Termination
+ Piping & Tubing, Hook up.
+ SIL classification & SIL verification

Control and Automation System
+ Distribution Control System (DCS), Safety Instrument System (SIS), PLC, Control system
+ Fire & Gas System
+ Analyzer, Ambient Air Quality Monitoring, Continuous Emissions Monitoring Systems (CEMS)
+ Machine Vibration monitoring system.
+ Tank Gauging System
+ Custody flow metering system
+ MOV Control system

Communication System
+ Telephone, LAN, Radio system, Master / Slave clock system
+ PA/GA Public Address System
+ Process and security CCTV system

Code and Standard
Electrical & Instrumentation: API, IEC, IEEE, NFPA, DNV…
Safe Use of Electrical Equipment in Hazardous Areas in Accordance with IEC-60079

Education

Hanoi University of Science and Technology
Diploma in Electrical and Automation Engineer

   Aug 1999
— Apr 2015

2014 Project Management: Project Management Body of Knowledge (PMBOK)
2013 Process and Philosophy for designing Electrical and Control system for Jack-up Rig
2014 BOSIET (OPITO Approval)
2013 Safe Use of Electrical Equipment in Hazardous Areas in Accordance with IEC-60079
2012 ABB Industrial IT System 800xA
2011 Wonderware InTouch Human-Machine Interface
2011 MFX_4 Product Flow Controlling & Monitoring System
2011 Honeywell Tank Gauging and Inventory Management System
2005 Foreign Trade University, Hanoi Vietnam
2004 Diploma in Electrical and Automation Engineer, Hanoi University of Science and Technology

Experience

Hyundai Engineering & Construction Co., Ltd
Senior Instrument and Control Engineer

   Jun 2019
— Current

+ Coordinate with head office engineering to prepare and submit documentation for Client approval.
+ Clear and reply comment from Client.
+ Review design drawings and document and coordinate with engineering to clarify and correct such as:
 Instrument Specification, DCS, ESD I/O List,
 Instrument Data Sheet, Instrument List
 Technical Bidding Evaluation (TBE)
 Cable Schedue, Connection Drawing, Hook up Drawing, Typical Instrument Installation Drawing
 Cable Tray Drawing and Conduit Drawing
 Bill of Material (BOM)
+ Prepare construction progress schedule, Subcontractor scope of work include: man power mobilize schedule, tool and equipment for erection and installation, material delivery and handling, etc.
+ Participate in the daily, weekly, schedule, progress coordination meetings
+ Monitor material schedule, do inspection to make sure material is good quality, adapt with specification,
to match with site progress.
+ Coordinate with other disciplines (Engineering, Electrical Mechanical, Civil and Material) for site
installation smoothly.

Doosan Heavy Industries & Construction Co., Ltd
Senior Electrical Engineer

   Apr 2017
— May 2019

+ Manage, supervise HSE activity on site and support subcontractors for working safety.
+ Review design drawing and coordinate with engineering team to clarify and correct such as:
 Single Line drawing, Load List, Load Flow Study Report, Short Circuit Current Study Report, Large
Motor Starting Study Report…
 Electrical Specification, Electrical Equipment Data Sheet
 Cable calculation and sizing, DC, UPS, Baterry calculation.
 Cable Schedue, Connection Drawing.
 Cable Tray Drawing and Conduit Drawing
+ Participate in the daily, weekly, schedule, progress coordination meetings
+ Daily, weekly report to section manager include: Subcontractors manpower, tool/equipment, progress,
errection control log, outstanding works, punch list...
+ Coordinate with other disciplines (Engineering, Mechanical, Civil and Material) for site installation
smoothly.
+ Monitor material schedule, do inspection to make sure material is good quality, adapt with specification,
to match with site progress.
+ Coordinate, manage, supervise Subcontractors, Vendors to do site installation, site test, commissioning
of Electrical equipment such as: Transformer, MV/LV Switchgear, GCB… CT, VT, Relay.

Amec Foster Wheeler
Electrical and Instrument Specialist – PMC team

   Jul 2015
— Current

As a member of the Integrated Project Management Team my role was to ensure EPCM and sub-contractor compliance with the project specification, codes and standard from construction to commissioning phase include:

+ Inspection HSSE activity on site and support local workers using behavioral safety technique
+ Review of method statements, ITPs and dossiers submitted by the Contractor.
+ Inspection (witness and review) for cabling, termination, Insulation Resistance Test (IR) including High Potential Test for HV cables.
+ Inspection (witness and review) for installation, site acceptance test (SAT) and function test for Transformers, LV/HV Switchgear, MCC/VSD panels, Power Management System and DC&AC UPS System at the power substations; Telephone, LAN, radio system, PA/GA, CCTV system at the Buildings.
+ Inspection (witness and review) for Testing of LV/HV Motor Solo Run, Mechanical Running Test (MRT)
+ Inspection (witness and review) for installation, site acceptance test (SAT) and function test for Distribution Control System, Safety Instrument System, Fire & Gas System, Analyzer System, Ambient Air Quality Monitoring System, Continuous Emissions Monitoring Systems, Machine monitoring system, Tank Gauging System, MOV Control system Panels at the Instrument Satellite Buildings.
+ Inspection (witness and review) for calibration, instrument piping & tubing installation, leak test, popping test for Pressure Safety Valves (PSV)
+ Inspection (witness and review) for instrument installation, loop check, valve stroke test and function test (over 10,000 loops)
+ Final inspection, mechanical completion walk around, clear punch and doing handover
+ Daily site surveillance, technical discrepancy report, Quality Deviation Notices (QDN).

- Being responsible to Inspection for the following Units in the Refinery Plant:
+ 355MW Power Plant Unit (2 Gas Turbine Generator and 05 Steam Turbine Generator)
+ Sea water Unit, Cooling water Unit
+ Sewerage & effluent treatment plant Unit
+ Ship loading and truck loading Unit
+ Custody flow metering Unit
+ Sulphur Forming & Storage Unit
+ Hydrogen manufacturing and distribution Unit
+ Tank farm Unit (Crude Oil Tank, Intermediate Tank, Product Tank)
+ Central Control Building Unit

Semco Maritime Vietnam
Lead Electrical and Instrument Engineer

   Nov 2013
— Jul 2015

- Installation, hook-up, pre-commissioning and commissioning for Electrical, Instrument and Control system for Rig Upgrade and offshore hook-up projects.
- Plan, schedule, bidding, calculate budget, manpower and material. Requirement supporting Project Manager
- Preparation of, keep track and manage documentation from engineering phase to handover.

Projects had been carried out:
Rig upgraded projects:
Rig name: West Telesto Client: Sea Drilling
Rig name: Murmanskaya Client: Artikmorneftegazravedka OJSC AMNGR
Fabrication and installation projects:
Offshore Accommodation Modules Client: Premier Oil
Laboratory and Chemical store containers Client: Lam Son JOS
Offshore Living Quarters Client: Transocean
Laundry Module Client: Shelf Drilling
Electrical Control Shelter Module Client: Star Engineering JSC

Petrol Vietnam Gas Joint Stock Company - PV Gas D
Maintenance Engineer

   Apr 2012
— Oct 2013

- Prepare procedures and methods maintenance strategies
- Carry out routine scheduled maintenance work and responding to equipment faults
- Diagnose breakdown problems
- Liaise with client departments, customers and other engineering and production colleagues
- Control maintenance tools, stores and equipment
- Deal with emergencies, unplanned problems and repairs
- Improve health and safety policies and procedures
Being responsible directly to electrical, instrument and control system for Low Pressure Gas Distribution Station.

Mong Duong 1 Power Plant in Vietnam (2x540MW Coal Power Plant)
Electrical QC

   Mar 2011
— Mar 2012

+ Prepare Inspection Dosier: Notificaion for Inspection (NFI), Inspection Test Plan (ITP), Method Statement, Drawing…
+ Inspection cabling and termination
+ Insulation Resistance Test (IR) for cables, motor, transformer, MCC, Switchgear…
+ High Potential Test for HV cables, transformer, Switchgear…
+ Inspection Installation of motor, transformer, MCC, Switchgear, DC&AC UPS
+ Line check for MCC, Switchgear, Transformer …
+ Support Vendor / main constructor for Site Acceptance Test (SAT) for transformer, MCC, Switchgear, DC&AC UPS…
+ Inspection installation and testing for earthing, fire alarm, lighting and small power, HVAC system

Petroleum Trading Joint Stock Company (Petechim)
Construction and Commissioning Supervisor

   Jun 2009
— Mar 2011

DUTIES AND RESPONSIBILITIES:
+ Construction and commissioning supervisor for electrical, instrument and control system for the Oil Terminals.

Power Generation and Distribution System
Fire and Gas System
Tank gauging system
Flow metering System
Monitor and Control System
Mechanical, Piping and instrument (P & ID) (Valves, Pumps, Motors...)
+ Involved in supervise installation and commissioning of electrical and control system as above for the Oil Terminals.

PROJECTS HAD BEEN CARRIED OUT:
Project: Upgrade Lien Chieu Oil Terminal
Client: Petro Vietnam Oil Corporation (PV OIL)

Project: Supply equipment for Chan May Oil Terminal
Client: Petro Vietnam Oil Corporation (PV OIL)

Project: Supply equipment for Quang Ngai Oil Terminal
Client: Petro Vietnam Oil Corporation (PV OIL)

Project: Supply equipment for Nha Be Oil Terminal
Client: Petro Vietnam Oil Corporation (PV OIL)

Northern Electrical Equipment Manufacture Company
Electrical Engineer

   May 2004
— Dec 2006

DUTIES AND RESPONSIBILITIES:
Involved in design Electrical system for the Medium Voltage Switchboards (12kV, 24KV, 36KV) Measuring Panels, Control Panels, Protection Panels and Low Voltage Distribution Panels supplying for the Power station, Transformer station

PROJECTS HAD BEEN CARRIED OUT:
+ Supply Medium Voltage Switchboards 24kV for the Lai Chau Transformer Station.
+ Supply Measure Panels, Control Panels, and Protection Panels for the 110kV Phu Tho Transformer Station

Search Jobs by Industry

Ad
Ad
Ad