Chemical Engineer

Last Updated: 27th May 2017 (over 5 years ago)



Phone Number


Age Range
35 to 44

Qualification Level

English, German, Urdu


I did my Master of Science in process engineering and plant designing at Brandenburg Technical University (BTU), Cottbus, Germany. During my time as a student I have had some part-time and vacation jobs, all of which have given me the necessary experience required of a process engineer. As you can see from my CV, I had also worked in “Brandenburg Technical University at the chair of Process Engineering, Plant Design and Safety Technology” as a professor assistant. During my Bachelor, Master studies and Professor assistant work, I had firm knowledge in the field of Chemical Process Engineering & Design, Modelling and Energy calculation Using Aspen Plus Simulation Tool, these models were further use to support Safety and Optimization studies.



   May 2016
— May 2017

M.Sc. Muhammad Umair Suleman
Kleyerstr. 58, 60326 Frankfurt am Main
Handy: +49 176 59650621, Email:


Date / Place of Birth: 25.03.1981 / Quetta - Pakistan
Nationality: German
Family Status: Married
Driving License B Class (Germany / International)


11/2010 – 04/2011 Integrated Business Processes with SAP ERP
Certification: University of Duisburg Essen, Germany

Logistics: Purchasing, Inventory Management, Warehouse Management, Production Control, Sales and Distribution, Plant maintenance, Project Management,
Accounting: Financial Accounting, Controlling
Human Capital Management: SAP Business Intelligence, SAP Business Objects

08/2005 – 06/2008 Studied at BTU Cottbus
Master's Degree: “Process Engineering and Plant Design”

Course Work Advance Separation Techniques (Oil & Gas)
Heat, Energy & Mass Transfer with CAE ( ASPEN and Comos PT Tools)
Process Plant Design & Modelling
Advance Chemical Reaction Engineering
Process Plant Safety and Risk Analysis
Aerosol Technology
Recycling Technology
Process Optimization & Techniques
Environmental Technology
Business Administration
Fluid Dynamics (ANSYS FLUENT, CFD)

Master Thesis Characterisation and Validation of Soot Aerosol Generator
The soot aerosol generator mass, energy and momentum balance
The stability and reproducibility of the generator
Characterized by the comparison of soot particle size distributions
Laminar Jet Flame Model characterization with and without quenching
The Fourier transform infrared analysis is used to determine the exhaust gas composition and the kinetic validation

01/1999 - 06/2003 Studied at the NFC-Institute of Engineering and Technology (NFC-IET), PAK
Bachelor of Science: Chemical Engineering

Bachelor Thesis Phosphate Fertilizer from Rock Phosphates
Study of the phosphoric acid process
Feasibility study
Material Balance, Heat Balance, Energy Balance
System Design and Cost Calculation (Process Economy)


10/2016 -12/2016 Production and Quality Assistant in DiaSorin, Dietzenbach

Production of Pharmaceutical products under GMP conditions
Clean Room Technology
Process "Starter Reagents Production"
Documentation of the manufacturing process according to the specifications
Work on Full and Semi-automatic machines (Bausch + Ströbel)

08/2014 – 04/2016 Junior Consultant in Logitive Systems GmbH

Project Co-ordination

05/2009 – 10/2013 Professor Assistant at the Chair for Safety Systems and Design at BTU- Cottbus

Distillation Column Design & Simulation
HAZOP und FMEA Case Studies
Practical Exercises with Aspen Plus, ComosPT (CAD)
Analysis of the Process by Aspen Dynamics
Lab. Work Assistance
Safety System Design & Calculations

01/2006 – 06/2008 Worked at the Chair of Mechanical Process Engineering at BTU-Cottbus

Project Assistance
Support and Assistance of the experimental work

03/2007 – 07/2007 Trainee Eka Chemicals, Sweden

Industrial Internship In the field of research and development
Experimental work in laboratory scale
Modelling and evaluation of the chlor-alkali reaction
Validation of laboratory results at the Eka-Chlorat plant in Alby, Sweden
Determination of Hypo-Chloric Acid Reaction Rate

10/2003 – 09/2004 Worked as Project Engineer at N-Viro Pak, Pakistan

Responsible for design selection and planning
Carbon filters, Ion exchanger and RO systems Installation
Execution of the projects
Installation qualification and Operational qualification

06/2002 - 07/2002 Trainee, Attok Refinery Limited, Pakistan

Catalytic reforming, catalyst recovery and refinery process
Practical exercise of process control with process control system (DCS)
Distillation of crude oil study

06/2001 - 07/2001 Trainee, National Refinery Limited, Karachi, Pakistan

Introduction to safety process
Introduction to the refinery process
Introduction of maintenance of heat exchangers, steam turbines
Practical exercise of process control with process control system (DCS)


07/2006 – 08/2008 Voluntarily worked in IAESTE „International Association Exchange Student for Technical Experience“.


Languages: German (Good), English (fluent), Urdu (Mother Tongue)

IT skills: Advanced knowledge of MS PowerPoint/ MS Excel/ MS Word and keen user of Aspen Plus, Aspen Dynamics, Chem CAD, SAP ERP, Windows 7/8, ComosPT(CAD), VISIO, HINT, Ansys FLUENT (CFD)

Interests: Sports (Hiking), Jogging, Bicycling, Badminton (TG Höchst 1847 e.V.)

Frankfurt am Main, Germany, 27.05.2017