Senior Inspection Engineer

Last Updated: 8th March 2018 (over 4 years ago)

Saudi Arabia


Phone Number


Age Range
25 to 34

Qualification Level

Arabic, English, Hindi, Urdu


Around 11 years multidiscipline experienced professional registered with API, SCE, NACE, PEC & PIMME. Adequate experience in continuous process industries, EPC and other project management facets of engineering field. Core competencies in on-stream & off-stream Plant static equipment Inspection and QAQC at construction and turnaround projects in Saudi Arabia, United Arab Emirates & Pakistan.

Certified as API-510, API-653, NACE CIP-1, ISO QMS Lead Auditor and Approved by Aramco as VID Inspector (SAP# 70015020) for Pressure Vessels (QM 30), Heaters (QM 33), Tanks (QM 34), Steel Structure (QM 15), Coatings (QM 11 & 12) and General Mechanical (QM 03).


University of Engineering & Technology Lahore
B.Sc. Metallurgical & Materials Engineering

   Sep 2003
— Sep 2007


Saudi Aramco Total Refining and Petrochemical Company
Area Inspector (GC-11)

   Mar 2017
— Current

• On stream & off stream inspection of columns, drums, heat exchanger, reformer, reactor, Air cooler and piping in Distillate Hydrocracker (DHC) and Hydrogen production Units (HPU) Train-1.
• Turnaround 2018 Execution (Train-1): Off- stream inspection for piping components (pipes, fitting, flanges, valves, supports) as per code requirements.
• Deployment of NDT crews on piping circuits for UTG, PT and PMI and reviewed their NDT reports as per requirements.
• Monitoring all NDT activity (MT, UT, PMI & PT) and indicate the (TML) thickness measurement locations.
• Assessment for Ultrasonic thickness measurement results and calculated corrosion rate, remaining life and next due inspection date.
• Preparation of final inspection reports and uploading the data in Meridium software for analysis and future record.
• Turnaround 2020 Inspection Scoping & Planning (Train-2): Prepared list of static equipment and piping to be taken in scope for train-2 turnaround by considering GA Drawings, PIDs, Inspection history & recommendations, their criticality, process conditions and damage mechanisms.
• Preparation of detailed inspection plan & NDT Requirements for identified turnaround static equipment & piping for Train-2 Turnaround by considering PIDs, PFDs, MDRBs, SIS, MSDs, Licensor documents and inspection history & recommendations as per Meridium database.
• Identification of required NDT type & extent of NDT. Prepared sketches & marked locations to ensure NDT compliance in line with the requirements.
• Preparation of PZV/TZV database for their calibration due date and tags to be included in the turnaround.
• Relocation of TMLs in Corrosion Loops as per the scaffolding and insulation requirements and updated the same in V Suite Core (3D) software.