Master Degree
Measurement for rationalization of energy consummation
Measurement to decrease the industry impact on environment

Electrical engineering Degree
final study project:
Study and realization of numerical control of UPS
Application realized : control of Inverter 10 KVA base IGBT

Acquired all necessary basic science to study the engineering specialties

Act as team leader:
2 EX inspectors
2 Engineers
3 Technicians
Follow the routine inspection of EX equipment installed on plants
Reparation or replacement of no conform equipment
Report the progress of inspections
Update EX registers

Prepare scopes of work and ensure that all materials and equipment are available.
Survey
Prepares scopes of work for approved work programmes ensuring that all relevant operating procedures and safety regulations are written
Assists with the analysis of equipment malfunctions and makes recommendations for repair and future preventive action.
Preparation of the preventive maintenance schedule for plant and equipment and ensures that planned work takes place.
Propose improvement on the maintenance plan for electrical and HVAC equipment
Contribute on ensuring a good level of preparation and organization of the work carried out on Site by Suppliers, Specialists or external Contracted Companies on Electrical / HVAC
Expedites maintenance Equipment repairs with work scopes and testing requirements
Delegate with control or directly ensure the reception of activities performed by contractors on land and orders delivered at base, before shipment to FPSOs
Contribute on organization and maintenance of electrical data base (i.e. electrical motors.)
Continuous analyses of spare parts stock levels ensuring they are adequate and maintained, and that materials/equipment received fits with specifications.

Contribute on the evaluation of the performance of Contractors in Electrical HVAC activities & Contractors audits
Supervise Contractors activities (preparation and scheduling).
Act as Electrical supervisor for maintenance work on FPSOs.
Do the periodic survey on FPSOs electrical installation in the aim to:
- Diagnostic of failure notified by operation team/ EX inspectors
- Follow up and report the degradation of electrical equipment due to environmental conditions and operation
Prepare the work permits including the risk assessment basic /detailed
Tools used: SAP, E-PERMIT

In Salah Gas JV (Sonatrach, British petroleum, Statoil hydro), oil & gas company Algeria
Position Held: Maintenance team leader
Job description:
From October 2014 to February 2016 act as commissioning engineer for gas treatment plant with water reinjection system
February 2016 participate in plant start up
From February 2016to July 2017
Provide leadership and direction for maintenance team members.
Implements maintenance programs according to the schedule Maximo.
Develop the engineering and project query and propose the solutions
Audit of PTW and report safety observations, did periodic safety conversation in order to improve the compliance with safety standards.
Establish of task risk assessment (TRA)
Study of HAZOP and establish ORA if necessary
Participate in investigation of HSE incidents
Assessment team member for isolation certification
Ensure the development of versatility in the maintenance and operations teams.
Ensure that the Site maintenance work is planned and programmed in collaboration with the site superintendent.
Provides technical assistance and provides the resources in case of emergency
Assumes responsibility for the recommendation of the spare parts to ensure the good running of maintenance.
Report to the Maintenance superintendent the progress of Maintenance activities and the issue beyond the technical skills
Identifies and submits the technical problems to the Technical Department.
Ensure equipment availability and continuity of production in accordance with their integrity and maintenance program.
Create SPIRs for spare parts and decide for acceptance of alternative spares for obsolete product
Perform periodic security audits, work permits and energy insulation.
Made daily visits to sites to ensure compliance with HSE requirements.
Controls the individual work program and approves the changes and adjustments.
Lead in the process of evaluation and validation of competencies to ensure that personnel remain qualified and efficient. Implementation of training needs
Implementation, monitoring the performance of team and make biannual revisions.
Lead daily planning meetings and ensuring coordination between the different disciplines with the operation.
Manage the weekly meetings and coordination of activities between the others sites.
Ensure the human and material support for the other sites when needed.
Provide support and coordination of activities Turnaround (TAR) with TAR team by establishes the maintenance program for activities have the shutdown as condition of work.

- Operation and troubleshooting for the electrical equipment (10kV, 5.5kV and 0.4kV
Substations): power transformers, switchboards, SF6 and vacuum circuit breakers, grounding switches, protection relays and metering, supervision and control systems, battery chargers, UPS, batteries, LV and MV electrical motors, VSD, Load Management system(LMS), PLC emergency diesel generator, local control units, local panels, lighting. Equipment for explosive atmospheres.
- Maintain the EX register and keep the EX installation in acceptable status
- Develop and maintain electrical equipment maintenance and reliability strategies
- Develop renovation plans for obsolescence; maintain high performance levels for Electrical Systems.
- Develop the engineering query and propose solutions
- Lead management of change (MOC) for electrical system from the initiation to completion, testing and commissioning and documents update.
- Provide technical advice when required with regards to searching for new electrical equipment proposals, and review equipment specifications, documents and drawings.
- Provide technical expertise for electrical equipment maintenance activities, standards and procedures. Assist in developing Predictive and Preventative Maintenance plans and procedures for all electrical equipment.
- Develop the scope of work for Maintenance contract
- Establishment of switching programs for complex electrical isolation
- Participate in investigation of incidents
- Assessment team member for isolation certification
- Review Maintenance practices and support implementation by Creation of Job plans according to suppliers’ documentation
- Coordinate with Maintenance teams to assist in determining and predicting electrical equipment components’ life using appropriate reliability tools, such as Failure Modes and Effects Analysis (FMEA), Mean time between failures (MTBF) and Mean Time to Failure (MTTF), to ensure extended operating life of electrical equipment.
- Facilitate investigations into electrical equipment failures or incidents to identify root causes. Produce written reports documenting the failure, cause and preferred solution by which similar failures or incidents are prevented.
- Establish and audit backup and recovery procedures for Electrical system and related equipment.
- Train Electrical Technicians on general knowledge of electrical systems and awareness of safe working practices
- Review and establish safe working practices and procedures for working on Electrical Systems.
- Ensure full compliance with health and safety and environmental policies and regulations at all times.
- Help design plant modifications of a technical nature with the Electrical System.
- Maintain and audit an inventory of electrical systems equipment. Ensure Electrical System spares are established and maintained.
- Commissioning of new installation (two compression stage, 01 GTG Rolls Roys, 4 GTG Siemens, 01 LMS Brush, 2 substations 5.5KV and 3 substations 0.4KV with control systems PLC).
- Exchanges of experiences trough sites visits with other associations such as GTFT (SONATRACH, TOTAL, REPSOL), BRN (SONATRACH, AGIP) in order to improve the safety system and control of work system

Lead Maintenance activities (Preventive and corrective) for the electrical installation:
Power transformers, numerical protective relays, switchgears, and uninterrupted power systems UPS, rectifiers, Motor control centres, low & high voltage AC motors maintenance and overhauling. Alternators maintenance and overhauling
Plan and carry out Predictive/Reliability Centred Maintenance programs for condition monitoring of Electrical equipment by ensure improved machine availability and power system reliability
Coach and supervise the maintenance team
Coordinate with the subcontractor for the maintenance tasks
Lead team of 3 engineers and 15 technicians
Ensure the availability of equipment of production
Improve the maintenance by following and record the maintenance practices and expertise

- Project responsible for implementation of CMMS, Maintenance building (creation of tag register and spare parts table, PMs, edit report for Maintenance)
Review the existing maintenance practices and support implementation of innovative & modern methodologies for enhanced productivity leading to improvement in MTBF. To ensure optimum utilization of the CMMS (COSWIN) system for maintaining job history and data quality so as to ensure retrieval of quality information.
Determining and predicting electrical equipment Components’ life using appropriate reliability tools
Electro-mechanical maintenance Responsible.
Planning engineer and assistance for all steps for work flow (work order loops and spare parts procurement)
- Implementation of SAP (CMMS), transfer of histories from the old system (COSWIN) to new system (SAP)
Delegated as commissioning engineer of new power plant (2x 250 MW gas turbine generators)

Directly responsible on all engineering, planning, installation Commissioning, materials and all other technical services Essential to support the construction and installation Activities
Ensure that the details included in the project documents are fully understood and properly applied by Construction personnel and that all project preparation is in order
Review project planning with a view to improve the realization period.
Leads all required testing and start up/ Assist the client after CAC (conditional acceptance certificate)
Clear the punch list after PAC (partial acceptance certificate)