Sr. Mechanical Engineer

Last Updated: 3rd February 2018 (over 4 years ago)

Iran, Islamic Republic of


Phone Number


Age Range
35 to 44

Qualification Level

English, Farsi


Dear Sir/Madam,
With a BSc. in Mechanical Engineering from the best university of Iran, “Sharif University of Technology”, and having over 13 years experiences at EPCC phases of Marine/Shipbuilding and especially different jack up drilling rig projects, I got the confidence to apply for this opportunity on your valued company.
After several years working in shipyard & engineering Departments, I found a golden experience at the World's Biggest Rig Builder Company “KEPPEL FELS Shipyard-Singapore”, where I learned a lot.
I have also an engineering/construction/ supervision experience with UAE Company “Dragon Offshore Limited (DOIL)”, Hamriya Free Zone-Sharjah-UAE, for different rig refurbishment projects.
In 2015 I shifted slightly toward land rig drilling company within Rig Engineering & Management department and as Maintenance coordination and management using CMMS software.
I hope to meet your requirements and have the chance of joining your valued group soon.


SHARIF University of Technology, Tehran, Iran
B. Sc. in Mechanical Engineering

   Sep 1998
— Jul 2003

B. Sc.: Mechanical Engineering


TADBIR Drilling Development Co. (TDDC) Tehran-Iran

   Mar 2016
— Current

Key Responsibilities:
Reporting to Head of Engineering, our main objective will be to support our land rigs fleet in our continuous effort to deliver value to our customers.

Responsible for:
• Ensure that the maintenance system, planning and support are properly handled so we are capable of delivering high operational performance.
• Close co-operation with rig operation teams in the planning and optimization of maintenance
• Responsible for mechanical maintenance support within the Maintenance Support Group.
• Maintain close contact to rig units and other groups within Operations and Technical Organization
• Good knowledge with CMMS
• Update & advise to management for any mechanical issues
• Assist Technical Manager to arrange vendors for repair if necessary.

Planned Maintenance System Management
• Perform weekly material status checkup.
• Assist to Technical Manager on handling the requisition of equipment spares, including delivery and looking quotations
• Gather & Check the PMS record by weekly or monthly basis, depending on the system requirements
• Perform a proper documentation management of PMS record / Drawing / Manual
• Assist to Technical Manager / Consultant for the rigs maintenance
• Planning/Managing and arranging all technical maintenance and repairs for Company’s drilling rigs, identify and solve daily routine problems/issues
• Initiating action or authorizing action on purchases of spares for the rigs considering budget restraints.
• Day to day monitoring of the rigs performance and progress
• Report regularly to the Manager and follow up on problems/issues
• Participation in Management Review Meetings
• Provide assistance to the Manager in the preparation of rig operating budgets;
• Monitoring the company’s documentation required of the rigs

• Understanding of technical knowledge for rigs
• Updated on API industry standards and regulations, as well as rig systems
• Well organized, strong, pragmatic
• Ability to work in a team

TADBIR Drilling Development Co. (TDDC) Tehran-Iran

   Mar 2015
— Current

: Sr. Maintenance Planning/ Control Engineer
Company : TADBIR Drilling Development Co. (TDDC) Tehran-Iran
Project : Yaran Oilfield, Ahwaz-Iran (Onshore)

• Report to Project Engineering/Operation Manager
• Manage mechanical procurement (RFQ, MR, TBE, Vendor drawings review/Approval, FAT, ...)
• Preparing technical requirement for purchasing drilling equipment, material & spare parts (MR)
• Technical support to procurement/Commercial department
• Technical Review on vendor quotations and incorporation in operation/maintenance activities.
• Plan, Prepare & Investigate an organized Vendor List for procurement process and to achieve a final approved
Vendor List (AVL) for drilling field
• Prepare rig tender technical package
• Attend at Factory Acceptance Test (FAT) for BOP & Choke manifold
• Technical feed to drilling operation & maintenance team
• Technical Support to maintenance team for procurement of spare parts
• Rig Spare parts management (procurement, control,..)

“ROYAL GROUP” Engineering & Consultancy Holding, Tehran-Iran

   Jan 2014
— Mar 2015

Company : “ROYAL GROUP” Engineering & Consultancy Holding, Tehran-Iran
Project : Jack up Rig (Refurbish/Conversion)-HFZA Sharjah

• Report to Project Engineering Manager
• Accomplish feasibility study/ Concept for drilling rig conversion into work over or accommodation unit
• Project break down, schedule & plan for mechanical activities
• Prepare rig tender technical package
• Prepare feed for construction & equipment installation/ commissioning
• Interdepartmental Discussions and Commenting
• direct interface with shipyard construction, installation and commissioning teams
• Modify/develop engineering docs for refurbished/ converted systems (spec., P&ID, GA, commissioning docs,..)
• Maintain Design Quality and Design change control
• Manage mechanical procurement (RFQ, MR, TBE, Vendor drawings review/Approval)
• Manufacturer shop visit & FAT attendance

PIRE CO. Engineering & Consultancy Co., Tehran-Iran

   Aug 2012
— Jan 2014

Project : Jack up Drilling Rig / Shipbuilding

• Report to Project Engineering Manager
• Supervision on team and provide technical guidance
• Prepare/ develop project mechanical activities break down & plan, (Detail, Procurement & Construction)
• Assist the Engineering Manager to Plan and execute workload through the Engineering Department.
• Review/Check mechanical Basic Design Docs (GA, equipment sating/sizing, specification, data sheet,
• Interdepartmental Discussions and Commenting
• Manage and control for develop & issue of Procurement engineering documents (MR, TQ, TC, TBE, …)

Jack up Drilling Rig (Owner Site Rep.@ KEPPEL FELS Shipyard /Singapore)

   Dec 2011
— Aug 2012

Project : Jack up Drilling Rig (Owner Site Rep.@ KEPPEL FELS Shipyard /Singapore)

• Attendance in MC, Commissioning & Rig Delivery as Owner rep. Supervisor in KEPPEL FELS Shipyard
• Review and Approval of Engineering and Construction Documents
• Site Inspection Before Installation (Mechanical Completion Check)
• Pre-Commissioning Document Review and Site Inspection
• Commissioning Inspection & Supervision for all Marine/Drilling Systems and equipment (Hull / Deck Machinery,
Safety, Ventilation, Accommodation & NOV package)
• Inspection & Supervision During Major Tests like as Jacking Trial, Endurance Test, Cantilever & Drill floor
Load Test, Inclination Test.
• Inspection & Supervision on Construction, Installation, Start-up and Delivery of Drilling Items
• Quality Monitoring/ Check of equipment installation as per contract spec.
• Clarify & follow up punches to be closed before system commissioning and final delivery punch closing.
• Signing-Off Commissioning and Completion Packages (Test Memo)
• Supervision on Non-Conformities/ Deviations
• Attendance in Factory Acceptance Tests (BOP in CAMERON shop, Mud Pump Safety Valves, …)
• Supervision on submit of Engineering Final Documents , Vendor Data, 2-Yrs. Spare Parts and Equipment Tools

PIRE CO. Engineering & Consultancy Co., Tehran-Iran

   Mar 2011
— Dec 2011

Project : Jack up Drilling Rig / Shipbuilding

• Study & Review Client Specifications & Requirement to specify clear scope of work in projects/ tenders
• Prepare mechanical requirements in current Projects and tenders
Equipment list & weight estimation)
• Develop/ Issue Detail Design for equipment & systems (spec, Layouts, P&IDs, Data sheet,)
• Maintain Design Quality and Design Change Control
• Provide Technical Feeds for 3D-Modleing Team (by AVEVAMARINE/ PDMS software)
• Provide Mechanical study & feed for shipbuilding tenders (Spec./ Equip. list, weight estimate, sample vendor data)

SAFF-ROSEMOND Engineering & Management Co., Tehran, Iran

   Aug 2008
— Mar 2011

Project : “SA20” Patent Jack up Drilling Rig

• Check & Development of Mechanical basic & detail Document (GA / Equipment List, ...)
• Study in Principle Drilling Operations, Equipment & Systems
• Equipment Sizing/Calculation
• Check/Develop Equipment layout and machinery arrangement
• Check/Develop Procurement Documents (Equipment Specification, Data Sheet, MR, ...)
• Mechanical Team Plan (Document Register for Detail, Procurement & Construction Phases)
• VDR Definition (Vendor Documentation Requirement) & follow up
• Study and Familiarity with PDMS 12.0 (Equipment Module)
• Study in Marine/Offshore Machinery- Piping Systems (Concept, Components, Standards, Materials)
• Study on Pressure Vessel Design & Construction (ASME Sec. VIII)

Iran Marine Industrial Co-Mazandaran Province NEKA Shipyard-Iran

   Jan 2004
— Aug 2008

Project : Multi-Purpose Anchor Handling Tug-Supply Vessels (AHTS)
: 63000 DWT Crude Oil Shuttle Tankers
: Semi-Submersible Drilling Unit

• Preparing RFQ docs. (TPS, MR, MTO, BOM, Preliminary Data Sheets)
• Technical Queries/Correspondence/Meeting with Vendors (KOM, TQ & TC)
• Review and Conditioning of Vendor Quotations (Technical Bid Evaluating, TBE)
• Vendor Documents Control & Management (Review, Expediting, Distribution, Approval)
• Procurement Engineering Coordination with Commercial & Involved Disciplines
• Development of Equipment Specification & Data Sheets for use in Project Teams (Vendor Data Incorpora-tion)
• Prepare/Develop Final Vendor Documents for Submission to Client (Data sheet, final book, ..)
• Prepare/Review Equipment Layout Drawings for Tie-in Connection Details
• Technical Support to Engineering, Construction , Commissioning, Operation and Maintenance Teams
• Review P&IDs to prepare BOM & Equipment List.
• Good Knowledge of Machinery Suppliers & their Product Range
• Familiarity with Design, Operation and Selection of Mechanical Equipment
• Prepare Equipment Installation Procedure (Acc. to Practice and Vendor final book)
• Prepare of Mechanical Completion & Pre-Comm. Procedures (based on Final Book and Yard Practice)
• Involved in Tech. Purchasing of following Equipment & Systems:
- Steam & Water Boilers and Economizer , Pumps (Centrifugal, Positive Displacement, Gears)
- Hydraulic Power Units
- Purifier and Centrifuge (Fuel oil, L.O)
- Compressed Air System (Compressor, Receiver, Dryers)
- Heat Exchangers (Heater, Condenser, Boiler, PH/ ST)
- Pressure Vessels
- Piping Bulk Material & Equipment (Man. & Rem. Valve, Pipe/Fitting/couplings/Connections ...)
- Fixed Fire Fighting Systems (CO2, Foam & Sprinkler)
- Architectural/ Accommodation Material & Equipment (Insulation materials, Door&/Window, Wall/Ceiling & Floor
Panel, wet Unit, Galley& Laundry Equipment)
- Safety Equipment (Rescue & Lifeboat with Davits, Loose Safety & Fire Fighting Equipment,)