17+Yrs Experienced Postgraduate Electrical Engineer


Last Updated: 24th September 2019 (over 3 years ago)

Address
United Arab Emirates

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Masters

Languages
Arabic, English, Hindi

Summary

A competent professional with 17+ years of experience in Design,Supervision,Installation & commissioning of Electrical Power system Equipment’s & have work experience in construction, Power, Oil & Gas industries with reputed Clients,ADNOC,DEWA & EPC contracting companies in India and U.A.E. Presently working with Limitless Master Developer at Down town Jebel Ali Projects, Dubai.

Adept at providing construction administration for Electrical Power & MEP Systems ensuring that engineering designs are in compliance with the project specifications, latest codes, procedures and local authorities regulations. Providing technical services to the client in all areas of Electrical works, review and monitor design activities and coordination for addressing technical issues. Focusing of all project activities during definition to execution stages till handing over. Managing projects and ensuring that project deliverables consistently meet quality, timing and budgetary requirements and advice for the preventive action to avoid any possible deviation from the schedule base line.
Conversant with Design, Installation of Low voltage electrical distribution system, Emergency power supply/UPS,Lightning protection system,Earthing system, Small power, lighting and distribution system, Central Battery Emergency lighting system, Structured cabling system for voice/data, Public Address and Music System, Fire and gas detection system,CCTV security monitoring system, Audio Video System, as per BSI,DEP&ISO standards.

Review and approval of material, Method Statement (MS),Quality Control & Quality Assurance plan(QA & QC) and Inspection Test Plan (ITP) as submitted by Contractor and ensure its compliance with all Company specification, Approved scope of work and local code regulations. Review contractors pre-commissioning and commissioning procedures and approve material testing results and certification, Spare parts, Operation & Maintenance Manuals and As-Built drawings. Preparing & assess the Project Close out Report & preparation of snag List in coordination with End user and ensure that all construction and commissioning activities are completed and accepted to allow release of PAC to contractor.

Education

Kakatiya University INDIA
Bachelor in ELECTRICAL&ELECTRONIC ENGINEERING

   May 1998
— Sep 2002

Experience

Limitless LLC, DUBAI.
Assistant Manager Electrical Engineering

   Nov 2013
— Current

Projects handled:

Supply, Installation, Testing & Commissioning of Zone1&2 Downtown Jebel Ali 132/11KV Substation (DJA091) worth 240 Million A.E.D
Oversaw 132/11KV Substation modifications as per DEWA new control Philosophy(CE/448/2007). Optimized the time & cost of the project by bringing in proper & smooth co-ordination between various components of the project and increased the profitability. Handed over 132/11KV complex substation project works to DEWA by utilizing Techno-Commercial Project Management skills and have gained hand on experience in construction of Power Transmission & Distribution Projects including underground cable transmission projects-EHV transmission networks up to 400kV and 11kV-22kV distribution networks.
Engineering, construction and supervision of down town Jebal Ali Infrastructure works worth 290 Million A.E.D
Down town Jebel Ali development is adjacent to two existing development JAFZA and Techno Park stretching approximately 11KM along sheik Zayed Road with a total land area of approximately 207 hectares. Downtown Jebel Ali has more than 300 third party plots that will contain a mixture of apartment blocks, hotels, offices and retail developments. Oversaw and directed all aspects of Master Planning major developments for Power Supply, Utilities and infrastructure. I was responsible for construction supervision and administration of Infrastructure works for Third Party Plots in down town Jebal Ali, Coordinate with DEWA/other authorities on all design development related issues during design & construction phase.
Construction Works for MX01, MX04 & MX05 car park bridge works including Air-cooled Chillier Plant worth 337 Million A.E.D
Mix use Buildings MX01 to 04 comprise four buildings of two 29 storey office buildings with a ground floor Gallery area running the full length of the development.MX05 is car park 6 storey separate building with connecting bridge in between MX02 & MX03 podium. Downtown development Zone-1 total cooling design requirement is 35000 tonnages with district cooling plant, as the development is phased between 2012 to 2030,independent air cooled chiller plant of 3000TR is built for MX01, MX04, MX00 buildings. Managed the project and ensured that project deliverables consistently meet quality, timing and budgetary requirements and advice for the preventive action to avoid any possible deviation from the schedule base line.
Maintenance Works for CM01, CM02, CM03, CM04, Al Khalil Plaza, chiller plants-2no’s worth 10 Million A.E.D
The Galleries has 4no’s offices building, retail and leisure facilities set in 20,000 square meters of shaded, landscaped grounds. Supervising maintenance contractors planned & routine jobs. Implement and monitor maintenance operations procedures that will prevent problems and related safe practices. Reviewing new tenants fit-out-modifications jobs and facility maintenance works, Upgraded DCS systems, chillier control system and ELV systems (Fire alarm, CCTV, BMS), provided maintenance and support at onsite and offshore.co-coordinating with DEWA for electricity & water connections. Analyze daily, weekly and monthly inspection reports to minimize potential down times.
Duties & Responsibilities:
 Liaised with discipline engineers and end-users, coordinated with external engineering consultant, authorities and construction contractors as required and developed cost effective and fit for purpose design solutions, to fit corporate requirements.
 Reviewed all areas of work covered in power distribution system. Preparation, also reviewing load calculation and design of power distribution system.
 Recommended appropriate solutions and proposed changes as necessary for electrical engineering solutions, gathers researches and analyzed pertinent data and information and prepared recommendations with supporting technical data.
 Build primary substations for projects as per DEWA power master plan.
 Liaised with local authorities for inspections, approvals and clarifications.
 Developed scope of work (SOW), specifications and designed criteria for facilities and infrastructure projects, included functional area of work, in tenders for engineering consultancy and construction, provided technical input to material approvals.
 Visited work sites to establish existing conditions and review applicability of existing drawings, standards and specifications and recommend appropriate changes.
 Providing guidance and coordinates efforts of the testing, commissioning and project delivery activities.

Control Application Emirates. ADNOC, BUHASA.
Senior Electrical Engineer.

   Nov 2011
— Nov 2013

Projects handled:

New Management, Auditorium, Auxiliary-1 & Auxiliary-2 Buildings worth 80 Million.
New Management is Standalone double story first Leed certified green office building at Buhasa is a mixed development project includes designing, installation & commissioning of power system equipment’s at substation electrical rooms & low current system inside the buildings. Performed modification of 11KV feeder panel’s & BRUSH PRISMIC PMS panel at substation no: 1.Sucessfully carried out power shutdown works inside gas plant and shifted power to new substations.
Buhasa 11KV/3.3KV Network Upgrade & Modification Package-1&2 worth 50 Million A.E.D
Replacing the existing switchgear panel with new 11KV switchgear on the footprints of old panels, Installation of 12/15MVA,33/11KVA Transformer(Areva Make) with associated equipment’s such as OLTC,RTCC,NET,NEC & NER,Upgrading the capacity of 2no’s 33/11KV Transformers from 12MVA to 15MVA. Modification of 1no’s existing 33KV GIS feeder & protection panel. Installation 3no’s 11KV/415V package substation with each 11KV RMU/QRM,11/0.433KV transformer, LV Bus duct, switchgear Panel & other accessories, changeover of power distribution from existing system to new pre-fabricated substations, providing F & G system for new SS-25 & 26 and interfacing with the GASCO network, wiring the F & G signal from SS-27(Police Station Area) directly to the control room, control & signal cabling for MV & LV system.

Duties & Responsibilities:
 Attending project progress meetings with GASCO project management team.
 Nominated Originator to carry out Electrical works safely by HSE GASCO (Buhasa).
 Attending the GASCO permit meetings with GASCO project Engineer’s & end-user prior to start of any electrical works, which are interfacing with existing system.
 Attended in Factory Acceptance Test (FAT) for various power system equipment’s.
 Preparing Method Statement (MS), Hazard Identification Risk Assessments (HIRA), Plan’s for shutdown activities, attending for GASCO punch list & closing all the issues.
 Prepare and review shop drawings, materials submittals, method statements, As Built drawings, O & M manuals, RFI’s.
 Conversant with Design, Installation, and System Testing & commissioning of Electrical Power system Equipment services and infrastructure works.
 Coordinating with the GASCO end-user for witnessing testing & commissioning activities of various Electrical substation equipment’s along with vendors.
 Assigning works to junior engineers, supervisors, foremen’s & fixing targets.
 Preparing the site material request & arranging materials, tools to site immediately.
 Actively participated in site surveys & prepared reports for the same.
 Leading the MEP team in undertaking the technical reviews and compliance checks of the contractor’s submittals.
 Monitoring project and staff to ensure that projects are progressing according to established procedures and cost, time and quality objectives.
 Preparing reports for project director and client indicating procedure adherence and project progress.
 Ensuring that main contractor is in compliance with project plans and specifications.
 Monitoring the quality of work performance by contractor and the quality of materials used on-site.
 Evaluating the progress of the project to determine if time schedules and cost objectives are being met.
 Striving to ensure project time and cost objectives are met.
 Implementing and following quality assurance program procedures.
 Implementing and follows health and safety program procedures.
 Preparing daily, weekly and monthly reports. Acting as a focal point for client and external teams.
 Being accountable for the delivery of the project and to manage a team accordingly.
 Managing the consultant and contractors teams for MEP delivery and close out.
 Supervising, and overseeing the consultants, main contractors and MEP sub-contractors.

Bin Shafer Electromechanical L.L.C. DUBAI.
General Electrical Engineer (M E P Dept.)

   Jan 2008
— Current

Projects handled:

Marina Bay, Plot C13, SectorRR02, at Najmat, Abu Dhabi.

Construction of Border Center {(Al-Huwalat), Ras-Al-Khaima} {(Al-Sowhaib) (Al-Hayera) (Umm-Al-Zamool) Al-Ain}

Radim Luxsory Villas

Construction of slipways, helipad other works at armed forces observatory Al–Baraka Abu Dhabi UAE.

Indian Islamic Centre, Abu Dhabi UAE.

Techno park Project-Dubai UAE.

Duties & Responsibilities:
 Preparing the shop Drawing &Load schedules.
 Coordinating various aspects of MEP works in accordance to the Electrical equipment’s.
 Preparing takes off and materials required. Attending meetings with the clients & main contractor.
 Supervision of the site work as per approved drawing.
 Undertaking & supervision the final connection of the equipment and commissioning
 Conducting the final site inspection after completion of the project.
 Planning, scheduling, and tracking the progress of the project.
 Setting up targets, setting required resources-manpower, equipment & materials.
 Technical supports for materials approval and procurement, planning of all service order by preparing work schedules.
 Coordination with the supervisors & foreman’s to carry out the work according to the specifications and drawings.
 Carry out regular site work to determine that all Electrical works complies with approved drawings and/or local authorities’ and international codes & regulations.
 Attending meetings with the consultants and the client’s representatives and defining the road map for the completion of the project in a pre- defined target period.
 Review and monitor shop drawings, materials submittals, method statements, as built drawings, O & M manuals.
 Engaged in designing issues, related to site modifications, as per site conditions.
 Record changes on site and Review markup drawings / as-built drawings.
 Check/ watch safety on site and report incidents immediately.
 Working on projects for greater environmental/plant safety & risk management and formulating/implementing environmental systems and managing over all safety operations.
 Submitting reports to higher management regarding cost, budget variation.
 Replying all the RFI’s from the consultants to get the work done as per best engineering practices, detecting if any variations in the job at early stage of project & executing without any delay.
 Fully conversant with Testing & Commissioning, BMS and Fire protection system.
 Implement international codes & regulations, and carry out Electrical works with approved drawings and follow the local authority.
 Attending Technical and progress meetings with the consultants and the client’s representatives and defining the road map for the completion of the project in a pre- defined target period.

Micron Electricals Pvt. Ltd., INDIA
Project Engineer.

   May 2002
— Jan 2008

 The QA/QC at Columbia Asia hospital, Project Quality Assurance Plan (PQAP), Method statement, Inspection test plans & Checklist. Conversant with material Submittals, material inspections, installation inspections for MEP Services Carried out testing & commissioning, snagging, As Built drawings and O&M manuals. Daily review about progress of work to senior engineers. Maintaining documents & records of work carried out.

 Installation, Design variation and work included Site Inspection for Erection and installation works. Attending co-ordinations & minutes of meetings. Maintaining documents & record of work carried out, review of updating Submittals, O&M manuals and As-built drawings. Testing & commissioning, job Work included final handing over to the client

 Operation & maintenance of 132/11 KV Substation, Trouble shooting of 2 No's 5MVA power transformers with auto on load tap changer and SF6 CB’s,CONTROL PANNELS,BUSBARS & RELAYS. Maintenance of 132/33KV SS at Madapur, Hyderabad with 2X16 MVA, Pr.Tr Capacity. Strong knowledge in electrical protection schemes, Supervision, monitoring and operation of primary and secondary power system through SCADA.

Search Jobs by Industry

Ad
Ad
Ad