Senior Electrical Technician
Last Updated: 23rd April 2019 (over 3 years ago)
⇨ CAIRN INDIA LTD. (Oil and Gas) Electrical Technician. plant in Gujarat (Operation and Maintenance) from-Sep.2016. To Till Date.
⇨ ZAKUM DEVELOPMENT COMPANY (Through Seattle International) (ZADCO, ADNOC) Abu Dhabi as an Electrical Technician in Operation and Maintenance from-June 2014 TO July 2016.
⇨ CAIRN IND. LTD up stream (Oil & Gas) plant in Rajasthan India. AS an Electrical Engineer. (Operation & Maintenance) from-Nov.2011 to May.2014.
⇨ NATIONAL PETROLEUM CONTRACTION COMPANY Abu Dhabi. As a Senior Electrical Technician (Commissioning, testing. Start up) from Oct.2009 TO Sep.2011.
⇨ RELIANCE REFINERY LTD. Jamnagar, India. Electrical Technician (Maintenance) from Aug.2005 TO sep. 2009
The terminal is now handling 190000 BOPD with 60 MW captive power plant, 220 KV Power Grid and 18 Mangala & 9 Aishwariya well pads with one water well site, and pumping terminal.
⇨ Carried out All maintenance work as per SAP PM Planning system.
⇨ Investigates and troubleshoots of maintenance problems. Diagnosing problems and takes appropriate action including devising and implementing solutions.
⇨ Preparation of shutdown job planning, spares & manpower planning, job execution as per the shut down schedule.
⇨ Involved the operation and Maintenance Activity in substation and field.
⇨ Involved the operation and Maintenance Activity of power generation 11KV*60MW STG (make trivani) /4.8 MW GTG. 6.6 KV (Make SOLAR) and * 6.6 MW and 1250 KVA EDG, HV & LV Drives and its Panel, Turbine Control Panel, Synchronized Panel, and Relay Panel.
⇨ Operation and Maintenance of 150 TPH Boiler (Make Thermex) and its MOV, HT & LT Drives.
⇨ Operation and Maintenance of Power and Distribution Transformer up to 20 MVA. HT & LT Panel like 33KV, 11KV, 415V and 6.6KV Panel makes ABB, AREVA, SIEMENS and L&T. SCHNEIDER.
⇨ Operation and Maintenance of Air circuit Breaker, Vacuum circuit Breaker, Vacuum contactors and SF6 Breakers.
⇨ Knowledge of Voltage protection relay, feeder protection relay and Transformer protection relay.
⇨ Maintenance and Troubleshooting of high voltage and medium voltage like 415V, 6.6KV and 11KV EX Motor up to 4.5 MW. Make ABB, Siemens & Lohar.
⇨ Maintenance of Variable Speed Drives and soft starter (Toshiba, Siemens).
⇨ Testing and Maintenance of All the EX and NON EX HV & LV PUMP Motor.
⇨ Maintenance of 230V Electrical Heat Tracing Panel and System with Self-regulating RTD Control.
⇨ Maintenance of 230V UPS, 110V Station Charger and Battery Bank.
⇨ Maintenance and Inspection of EX and emergency Lighting system and EX Portable Electrical Equipment.
⇨ Ensure that the Ex & IP rating of every electrical item on the facility is maintained, so that its Integrity is not compromised.
⇨ Provide Technical support to operation personnel for planned and corrective maintenance of electrical system & equipment.
⇨ Participate and provide working knowledge within PTW system including LOTO system.
⇨ Manage and motivate a team of Technician to maintain the highest safety performance while keeping them focused on the task at hand.
⇨ Ensured During all activity must comply with Electrical Safety Rules and Company Safe work Policy.
⇨ Good understanding and reading Electrical drawing, with excellent skills for Troubleshooting.
⇨ Maintenance according to PPM (preventative planed maintenance) and corrective maintenance.
⇨ Fault diagnosis & troubleshooting inside the plant and field.
⇨ Analysis and rectification of electrical problems and issues.
⇨ Interrogation of power protection relays after trips and routine testing and maintenance.
⇨ Prepare the purchasing requisitions and / or call off materials.
⇨ Ensured that the maintenance of electrical equipment is conducted in a safe and effective manner.
⇨ Performed switching, Isolation /de-Isolation, control work according with requested work schedules as per SMP/SOP.
⇨ Routine records of completed work and completed logs parameters readings and check sheets for maintenance work performed.
⇨ Coordinated, organized, performed extension of LV distribution board (bus bars, cubical, control and power cables) to supply extensions of process packages.