QA/QC Mechanical


Last Updated: 21st November 2017 (over 5 years ago)

Address
India

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Degree

Languages
English, Hindi, Punjabi, Urdu

Summary

Carry out EPC Project function (Auditing, Project QA/QC Planning, Sub Contractor’s Billing Verification, Processes control, Project contractual issues review, Preparing & Reviewing projects construction Documents Like Method Statements, Erection Procedures, QA/QC Procedures Manage TPI, Surveillance, Manage statutory and regulatory government party’s Pre-commissioning, Commissioning and system handover) and to assure project execution as per specification and contractual quality requirement.

Experience

SEPCO1 Engineering India Pvt Limited. Gurgaon INDIA
Project QA/QC Manager

   Jul 2017
— Current

• Co-ordinate with Sub-Contractor, vendors, Client and Third party for inspection.
• Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.
• Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
• Coordinate with the consultant’s representative and Site En-charge for inspection and meeting about quality problems including the closure of Non-Compliance Report.
• Monitor the site construction Inspection activity as per Project Quality Manual by Supervision and allocates QCI Personnel per discipline as required.
• Responsible to initiate Project QA/QC Organization Chart and to maintain update with correspond to project site requirements.
• Review and arrangement for submission of QCI personnel CV’s to contractor/clients interview and approval
• Conducting Internal Pre-inspection meeting to involved personnel in different discipline to discuss Inspection Procedures ITP’s and other issues as per Contractor and Client Inspection requirements.
• Responsible for verification & approval of all QA/QC Procedures.
• Responsible for verification and approval of ITP, WPS/PQR & WPQR.
• Supervise and review the collected Quality Records for proper tracking and compilation
• Participate in conducting internal quality audit as per company Project Quality Management System and external quality audit from contractor and client project requirements.
• Conducting internal weekly meeting with QCI’s and Construction Staff personnel for feedbacks, complaints and solutions.
• Conducting weekly Tool Box meeting at project site to make awareness of Welding Control, such as the availability of applicable approved WPS. WPQT range & validity, Welding Electrodes storage preservation and controlling among assign welding foreman and welders.
• Conducting weekly site Walkthrough Inspection together with contractor and client to oversee the violations regarding on quality issues and take steps to address the issue.
• Responses site queries and technical issues with respect to QA/QC matters.
• Maintaining and monitoring all issued Non-Conformance (NCR-Log) including internal and external audit findings and taking necessary steps in closing any open Non-Conformance on desired time and reported to the concerned.
• Investigate and analyses the root causes of violation and take preventive measures in the same that it will not repeat in future.
• Maintaining and monitoring of all involve equipment’s used in welding control and others that properly identified and calibrated as per procedure.
• To monitor and look out welding repair rate percentage in weekly/monthly basis and take necessary steps in controlling high weld repair rate.
• Attending daily/weekly quality meetings with clients.
• Preparation and submission of Weekly/Monthly QC Reports to QA/QC Head Office and Client (if required).
• Monitoring and maintaining track record of completed pressure testing of test package of project.
• All quality documents and final reinstated test packages to be hand over for final certification.
• Beside all above I am motivating my workman to achieved result and target with complete team spirit.

Heavy Engineering and Shipbuilding Company Kuwait
Manager Project QA/QC (Mechanical)

   Feb 2017
— May 2017

• Co-ordinate with Sub-Contractor, vendors, Client and Third party for inspection.
• Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.
• Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
• Coordinate with the consultant’s representative and Site En-charge for inspection and meeting about quality problems including the closure of Non-Compliance Report.
• Monitor the site construction Inspection activity as per Project Quality Manual by Supervision and allocates QCI Personnel per discipline as required.
• Responsible to initiate Project QA/QC Organization Chart and to maintain update with correspond to project site requirements.
• Review and arrangement for submission of QCI personnel CV’s to contractor/clients interview and approval
• Conducting Internal Pre-inspection meeting to involved personnel in different discipline to discuss Inspection Procedures ITP’s and other issues as per Contractor and Client Inspection requirements.
• Responsible for verification & approval of all QA/QC Procedures.
• Responsible for verification and approval of ITP, WPS/PQR & WPQR.
• Supervise and review the collected Quality Records for proper tracking and compilation
• Participate in conducting internal quality audit as per company Project Quality Management System and external quality audit from contractor and client project requirements.
• Conducting internal weekly meeting with QCI’s and Construction Staff personnel for feedbacks, complaints and solutions.
• Conducting weekly Tool Box meeting at project site to make awareness of Welding Control, such as the availability of applicable approved WPS. WPQT range & validity, Welding Electrodes storage preservation and controlling among assign welding foreman and welders.
• Conducting weekly site Walkthrough Inspection together with contractor and client to oversee the violations regarding on quality issues and take steps to address the issue.
• Responses site queries and technical issues with respect to QA/QC matters.
• Maintaining and monitoring all issued Non-Conformance (NCR-Log) including internal and external audit findings and taking necessary steps in closing any open Non-Conformance on desired time and reported to the concerned.
• Investigate and analyses the root causes of violation and take preventive measures in the same that it will not repeat in future.
• Maintaining and monitoring of all involve equipment’s used in welding control and others that properly identified and calibrated as per procedure.
• To monitor and look out welding repair rate percentage in weekly/monthly basis and take necessary steps in controlling high weld repair rate.
• Attending daily/weekly quality meetings with clients.
• Preparation and submission of Weekly/Monthly QC Reports to QA/QC Head Office and Client (if required).
• Monitoring and maintaining track record of completed pressure testing of test package of project.
• All quality documents and final reinstated test packages to be hand over for final certification.

Quality International Co. Ltd FZE. UAE
Manager Quality Management Department QA/QC (Mechanical)

   Feb 2016
— Dec 2016

Shandong Power Construction Corporation (SEPCO-1) EPC-Company
Senior Engineer Quality Management Department QA/QC (Mechanical)

   Jun 2011
— Feb 2016

Engineering, procurement construction and commissioning of 4X660 MW super critical thermal power plant with all aspect and warranty. This includes erection of heavy Structure, equipment’s like ID, FD, PA & SA Fans, Steam super heaters and Air pre heater, Coal Mills, Coal Handling Plant, CW piping, ESP and FF system, Fuel oil Tanks and equipment’s with piping, compressor House erection, Fire-Fighting System installation HVAC system Installation, welding and testing of joints (DPT, RT and Hydro testing). And also, the fabrication and erecting of steel structures for Boiler, ESP, FF, Coal Conveyors, Wagon and tipplers and Air pre-heater. etc.

Artson Engineering Limited (Subsidiary division of (TATA PROJECT LIMITED) EPC- Company
Lead Engineer Mechanical QA/QC (Section Head)

   Sep 2007
— Jun 2011

Fabrication Erection, welding NDT hydro testing Painting & Commissioning of 64 No site erected intermediate storage tanks dimeter from 66 meter to 22 meter (Internal floating Roof, Dome Roof, Floating Roof, and Fixed Roof as API-650 and 620) with firefighting works.

Sage Metal Limited Faridabad India
Engineer –Mechanical QA/QC-Heavy Fabrication.

   Aug 2005
— Sep 2007

Search Jobs by Industry

Ad
Ad
Ad