Mechanical Engineer: Chief Technology Office in "FIRE AND GAS ENGINEERING COMPANY".
Last Updated: 22nd October 2018 (over 4 years ago)
Chief Technology Officer.
ICAT Mechanical Commissioning Supervisor
— Nov 2013
Work at ”Karabatan” OGS area. Preparation of the pipeline to leak test. Testing pipeline on gross air leak test. Set up and supervise the commissioning of all pumps and compressors, fans, stabilizations systems/ oil heaters, separators, electrostatic coalesers/ Ensuring that the mechanical completion is achieved by the Contractor for systems equipment /vessels and systems are built and installed as per construction documents, thru verification and monitoring of contractors field activities and witnessing / Alignment checking /all final testing/punch listing and clearing of punch items / Conduct line checking as per approved drawing and approval of final “as built “drawings Preparation, testing and starting up of hoisting devices, setting the systems with chemical agents, fire-fighting systems, adjustment units&devices / Supervise vendor representatives for check and commissioning of equipment and any other special testing or maintenance requirement Lead a team during fieldworks in all different maintenance activities, supervise assigned personnel in executing all commissioning activities / Provide regular status reporting of commissioning activities / Responsibilities include issue work and raise relevant Permit to Work (PTW) for work activities as and when systems are mechanically completed and handed over for Commissioning to commence. Supervision of a 32 people, including supervisors,mechanics, assistants, of locals. Other responsibilities include P&ID Green Lining & Systems Punching, Pneumatic Line Air Blows, No load & Loaded Motor Runs, coupling alignment, Pumps & Coolers Run etc. Commissioning activities and start up of the following systems on the plant: Cooling Medium system; Heating Medium system; Diesel supply for boilers system; Fuel Gas supply for turbines system; Nitrogen system; Plant Air system; Fire Water system; Instrument Air system; Potable Water system; Demineralisation Water system; Closed Drain system; Industrial Canalisation system; Domestic Water Canalisation system; Interaction with contract organizations; Presentation the check lists"A" and "B".
OGS ICAT Commissioning Engineer
— May 2011