SENIOR DESIGNER/DRAFTSMAN - (PIPING, PIPELINE, STRUCTURAL & METHODS)


Last Updated: 16th July 2018 (over 4 years ago)

Address
United Arab Emirates

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Degree

Languages
English, Hindi

Summary

CAREER SUMMARY
Senior Designer/Draftsman with 12 years of experience in Design and Drafting field with 11 years gulf experience in Oil & Gas / Offshore / Subsea/Marine/Shipbuilding industry. Very well experienced in Design review, preparing drawings (Structural, Piping, Pipeline, & Methods) and sceneries by engineering methods. Valuable experience in mentoring junior drafters, overseeing their works and recommending changes. Knowledge of ASME, API and BS codes and standards for major oil & gas industries. Knowledge of standard shallow water offshore installation activities. After my Diploma, I specialized in CAD and got a job as CAD Faculty, where I got a good exposure to CAD softwares. While major of my career has been in Process Piping and Structural design engineering in Oil & Gas, Offshore & Subsea Engineering, I have spent few years for method engineering drawing for offshore installation activities (Borwin3 project, Galloper project, SARB3 project). During 3 years in Petrofac, I have been involved even in new offshore installation vessels design (heavy lift and pipeline) and also having experience in Diving support vessels for IRM Contractor and Light construction activities.

Education

CADD CENTRE, THIRUVALLA, KERALA, INDIA
Diploma in CADD

   Dec 2004
— Jun 2005

Institute of Mechanical Engineers
Diploma in Mechanical Engineering

   May 2002
— May 2005

Industrial Training Institute, Trivandrum, Kerala, India
Trade Certification in Electrical Engineering

   Aug 1999
— Jul 2001

National Council for Vocational Training

Experience

PETROFAC INTERNATIONAL LIMITED
Sr. Design Draftsman (Piping, Structural & Methods)

   Jul 2014
— Nov 2017

Projects Involved:
• JSD 6000 Vessel (New Build Pipe Lay Vessel).
• BorWin3 offshore wind project, Germany.
• Galloper Offshore Wind Farm project, United Kingdom.
• SARB 3 EPIC project, United Arab Emirates.
Responsibilities
• Develop autonomously installation and methods drawing and procedures based on requirements from lead engineers.
• Review when required the design, drawing and sceneries produced by the draftsman method.
• Prepare the material take off’s (MTO’s), review vendors and subcontractors drawing and design calculation. Attend progress meeting when required.
• Interface with the draftsman team, the method, operations and assets engineers, and interface when required with vendors, projects, and construction team.
• Produce designs, drawings, sceneries based on information received from the vessel operation and Method Lead Engineers.
• Prepare detailed fabrication drawing from rough sketches and/or verbal instructions given by the vessel operation and the Method Lead Engineers.
• Preparing Detail drawings for Access platforms, Equipment supports, Skids, Handrails, Stairs and ladders, Boat landing, etc.
• Prepare Equipment Layouts, piping Isometrics drawings, Piping Layout drawings Support drawings, Structural drawings, fabrication and detail engineering drawings, Pipeline Standard Drawings, Pipeline Riser Detail Drawings, Marine Equipment Layout, and Helideck Drawings.
• With regards to the JSD6000 vessel pipe assembly plant and heavy lift configuration, prepare process flow diagram, utility flow diagram, operational safety diagram, equipment layout diagram, equipment data sheet sketches, installation aids equipment sketches, hazardous area clarification diagram, modelling and drafting methods installation sketches within schedule and with due respect to Quality and Safety requirements and related to design, verification, testing activities.
• Interface with other draftsman and report on continuous basis to the leads, the Engineers, and Designers the modelling and draft clash problematic identifies.
• Follow up during equipment construction activities the conformity of design and layout in accordance to company engineering procedure, OCPVES and ISO quality standard.
• Archive master technical drawing in accordance.

HARKAND GROUP (GULMAR OFFSHORE LIMITED.)
Sr. Draftsman (Mechanical & Structural)

   Oct 2011
— May 2014

Projects Involved:
• Petro SA, Ikhwezi Project – New field development in block 9 of central Bredasdrop Basin.
• Perenco, Gabon-Installation of 6”,8”&12” pipeline. Tie in & pre commissioning of pipeline.
• Dynamic Industries, Gabon - Topside work for Platform Extension.
• Caldive International, South China – Removal Installation of Subsea Riser.
• Rana, Mediterranean – Pipeline repair.
Responsibilities
• Participate in design reviews.
• Coordinate with Naval Architects, Installation Engineer & Project Engineers.
• Manage all activities related to drafting and technical documentation.
• Preparing Drawings for Various Projects and Tendering Works in Offshore Platforms as per Site Survey.
• Preparing drawings for Installation of Flexible Pipelines Cable routing and Vessel arrangement.
• Rigging arrangements and lifting procedures.
• Vessel structural modification drawings, Deck layouts, General arrangements, Marine equipment layout, Helideck drawings, Sea fastening arrangement and detailing, Detailing of Hatches and bulwark, Schematic drawings, process flow diagram, utility flow diagram, operational safety diagram.
• Preparation of clamps and J-Tube Fabrication drawings.
• Preparing Detail drawings for Access platforms, Equipment supports, Skids, Handrails, Stairs and ladders, Boat landing, Manifolds, Riser, Riser Clamps etc.
• Prepare Equipment Layouts, piping Isometrics drawings, Piping Layout drawings Structural drawings, fabrication and detail engineering drawings, Pipeline Standard Drawings, Pipeline Riser Detail Drawings.
• Prepare drawings for installation sequences, operation equipment utilisation and vessels general layout.
• Prepare different kind of fabrication and detail drawings like diving basket fabrication details, bumper bar arrangement and detailing, Monkey holes and soft patch detailing.
• Prepare Material take off (MTO) for projects and tendering purpose.
• Maintain Proper documentation of drawings and indexing.

KHARAFI NATIONAL, ABU DHABI, UAE
Sr. Draftsman (Piping)

   Apr 2009
— Sep 2011

Projects Involved:
• Integrated Gas Development Project - Habshan 5 Process Plant (GASCO, UAE)
• Sewage Treatment BOOT Project - ISTP1.
Responsibilities
• Translating the design drawings into valuable and accurate working drawings.
• Preparing Process piping drawings (GRP & HDPE). Schematic (Isometric Views) and coordination with other Services.
• Prepare Equipment Layouts, Piping Layout drawings, Piping Isometrics drawings Structural drawings, fabrication and detail engineering drawings,
• Preparation of plot plan and pipe rack layouts.
• Routing and Clash Checking of All Piping and Inter discipline clash coordination
• Prepare Material take off (MTO)
• Finalize and officially submit working design drawings to supervisor for subsequent approval from the client.
• Creates and maintain a personal library details and drawing.
• Ensures the shop drawings are submitted as per CADD Standards.
• Creates “as built” drawings at the end of the project using the information gathered from the project personnel to ensure accurate billing from the client or main contractor.

THERMO LLC (UNION PROPERTIES GROUP), DUBAI, UAE.
CADD Engineer

   Jul 2006
— Mar 2009

Projects Involved:
• Rig Super M2 - Hull 104 & 105 (Seawolf Oilfield)
• NDC New Build Rig 1 and 2 (National Drilling Company_NDC)
• Rig Super M2 - Hull 107 (K S Energy Ltd.)
• New Build RIG - Hull 106, New Build Rig - Hull 108 (Mosvold Energy Ltd.)
Responsibilities
• Receives & controls design drawings, Schedules shop drawing development and assign tasks to Draftsman.
• Coordinate with Sr. Engineer to translate the design drawings into valuable and accurate working drawings.
• Preparation of HVAC Shop Drawings with detailed section, Schematic Drawings (air & water), Mechanical plant room’s (Chiller plant room & AHU room) etc.
• Inspection of existing HVAC system & preparing the new ducting routing.
• Coordinate between other services and Detailing the mechanical shop drawings accurately.
• Finalize and officially submit working design drawings to project manager for subsequent approval from the client.
• Create “as built” drawings using the information gathered from the project personnel to ensure accurate billing from the client/main contractor.
• Ensure that the shop drawings are submitted as per CADD Standards.

CADD CENTRE, THIRUVALLA, KERALA, INDIA
Faculty

   Jun 2005
— Jul 2006

Responsibilities
• Teaching CAD & CAE Packages like AutoCAD, Pro/E Wildfire, MSC NASTRAN 4 W 4.5
• Preparing Electrical Mechanical shop drawings for Apartments & Office buildings on contract.
• Designs of various machine parts.

Search Jobs by Industry

Ad
Ad
Ad