Senior Mechanical maintenance Engineer,


Last Updated: 31st October 2019 (over 2 years ago)

Address
New Caledonia

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
65+

Qualification Level
Other Post Graduate

Languages
English, French, Russian, Spanish

Summary

SKILLS
 Senior Mechanical maintenance Engineer,
 Planner, Technologist Trainer
 Instructor/Assessor on Rotating Equipment

EDUCATION & TECHNICAL QUALIFICATIONS
 Mechanical Engineer, science of material & composite materials thesis UNB Moncton New-Brunswick Canada (1992)
 Logistic Engineer ISLI (Sup. de Co Bordeaux) (1984)
 Mechanical Industrial Engineer CESI Toulouse (1982)
 Aircraft technician diploma, aircraft's turbine engines from the French Air Force technical school, 1974

 Electrical equipment authoritative (Apave) H2 B2 skilfulness’ training 2009
 Upgrade DAO /CAO CATIA V5 rel.15. (2006)
 Quality Control, ISO 9000 /14000 ISTC Canada (1991, 1992 & 1994)
 OPITO, HUET (Falck Nutec) PSL N° P472276
 Microsoft office,Kaizen,SAP, Maximo,Unisup, AUTOCAD 2005, CATIA V5 rel.15 , Primavera 6, OPERCOM and ICAPS…
PROFESSIONAL EXPERIENCE
Since 11/2014 TECHNICAL MANAGER

JDR Engineering &Training Ltd Gibraltar

• Answer to calls for tender, looks for of new contracts, trainings assistance in retrofitting and maintenance engineering.
• 2017 Fev to Mar. Mechanical training and implementation for the maintenance staff at the coal-fired power plant of Safi (Morroco). Elaboration of mechanical training courses of the staff, the writing of the maintenance procedures, classroom training and assessment . Daewo/ SAFIEC for Comsip
• 2018 Jan to March Mechanical training and implementation HSE for the maintenance staff, classroom training and assessment at the combined power plan of Setif in Algeria for Hyundai /SAPE for Tractebel /Comsip.
• Since June 2018. EasySkill Australia detached to KNS New Calédonia as mechanical Instructor Senior for Training and elaboration under NAHME procedure test of the mechanical maintenance crew of the plan. Review of rotating equipment procedure for Pumps,
.
Typical work (6 month) Forecast for Operations & Maintenance plan in Africa:
• Develops strategies and policies to improve the operations & maintenance of production system. Ensures that all station strategic, operational, and financial and manpower targets are achieved. Develop, establish and implement targets in conjunction with VP-Operations for station operational activities.

2013 - 2014 SENIOR MECHANICAL INSTRUCTOR

TQ/PEARSON at Saudi Petroleum Services Polytechnic -Khafji

Setup of the new workshop in charge of the Technical Training Department, 180 students, 7 tt1 & 5 tt2 instructors.
Assessments, evaluation, classroom, new training input. End of contract unable to receive working visas (up to 60y.o)

2013 LEAD MECHANICAL ENGINEER

Telecommuting for a non disclosure company concerning an FPSU project)

Draft planning (using Primavera P6) and budget definition for rotating equipment, including:
• Overhaul WBS, service exchanges
• Participate in reviewing engineering documents & HAZOP studies,
• EPC Validate technical specifications and data relative to upgrade projects, installations, equipment and modifications

2012 - 2013 QUALITY CONTROL PLANNER & TRAINING MANAGER

Monnis SEU/Liebherr service center Ulaanbaatar, Mongolia

• Position at the Service Exchange Unit repair shop and Training centre at Liebherr Service Centre
• Brownfield rehabilitation, for the setup of the training center. Planification.HSE
• Training on rotating equipment such diesel engines (Mann, Cumins, carterpilar, Liebherr)
• Assessment and training for new technicians.
• Elaboration of the maintenance courses for the site of the coal's power plant (Boiler, turbine, distiller, heat exchanger and steam network supplying winter heat). Practice training for the supervisor team.

MECHANICAL ASSESSMENT TRAINER
Block 3 COBO Angola, Assessment and mechanical training of expatriate and local people, for the SPIE oil&Gas Company takeover of the contract. Conception of the selections tests.

OPERATIONAL READINESS ENGINEER, MAINTENANCE PLANER PRIMAVERA P6 HELIATEC Export France

TAR Planning setup for the big stop (shutdown) of the Sara refinery, in Martinique.

2011 MECHANICAL TRAINER / INSTRUCTOR

PETROFAC ALGERIA
Mechanical trainer at the Petrofac training center Hassi Messaoud.

Planning for training HSE, Basic work shop training, Rotating machineries such as diesel engine, turbines pomp's and compressors

SENIOR CONSULTING ENGINEER Oil & Gas

Energy department Alten S.A. – (France)

HSE position. According to regulation from rules (UE) no 252/2011 amending Regulation (REACH) to control in PPM, immediate and cumulative effect on the worker on their job's task.
For the scope of application of these new rules at RUBIS TERMINAL. I set up a prevention plan who\'s inclued the classification of a substance in accordance with Regulation (EC) No 1272/2008; and to derive levels of exposure to the substance which humans should not be exposed. This level of exposure is known as the Derived No-Effect Level (DNEL).
Procedure's improvement objective finalities:
- To define the improvement needs to the level of equipments
- To define the required specifications for the proposed modifications
- Standardisation of the control process in the whole company sites,

2007 – 2010 SENIOR LEAD MAINTENANCE ENGINEER / PLANNER

MT PROJECTS OIL AND GAS- MMO - SAIPEM S.A. – (France)
In charge of the turbine maintenance planning frame 5 and 7 (NP MS5001 et GE 7002 for the 12000h overhaul on the LNG project (Yemen)
Senior maintenance mechanical advisor Project Pearl GTL C8 (Qatar) on the RCM ETP process.
My know-how and practical expertise in shop floor practice for turbines, compressor and various equipments allowed young engineer to get familiar with common maintenance procedures.
Feasibility studies on plan overhaul in Ukraine and Russia for Chemical plans

IMR philosophy and RCM on Stockman project
AKPO maintenance deliverable workshop with customer, including RCM (Reliability Centered... Maintenance).
RCM BP project in EAU: maintenance engineering on refinery
ANGOLA detachment to TOTAL Angola EP from 07 to 10/08 DB17/EXP/MIN/MECA Lead Engineer maintenance MMO in charge mainly of the FPSO DALIA follow up (Framo cargo pump HPU system), Solar trouble shooting. ESP pump, Diagnose , analysis of the causes on many other breakdown.
Preparation for frame 5 NP 48000h inspection (FPSO GIRASSOL). Procedure change on maintenance task.
Qatar Mission at Qatargas ESU Train 4 & Dolphin: Practical tutorial training for ENI engineer, validation of their competence on a job. Asset register support
Certification on electrical equipment after training for AKPO technician at Port Harcourt NIGERIA
Preparation of the PAZFLOR Bid on maintenance philosophy, RCM, RAM GLOBAL MAINTENANCE SERVICES CONTRACT (GMC) MAINTENANCE ENGINEERING CONTRACT ENDORSEMENT part’s

05/10- Maintenance Engineer planer FS/FST Soyo Angola, Technical manager on the site, maintenance site in charge for the Waukeshia compressor fleet,( gas reinjection), trouble shooting and general rotating equipment maintenance.

2007 ROTATING EQUIPMENT MAINTENANCE SUPERVISOR

Aquitaine responsible of TIGF site maintenance.

Following procedure application failure, I was called to audit and rectify maintenance operations as per CEVEZO and ATEX II HSE standards.
I revised procedures on many tasks, including RCM.
I supervised overhaul of two Moto-compressors Cooper Bessemer GMHV12 (4000 & 8000h), and by doing, so I restored the confidence of the customer and that of the team. And that prevented any major problems.

2006 - 2007 TUTOR ENGINEER for MAINTENANCE TRAINING on ROTATING EQUIPMENT

CAMOM SA (SAIPEM) - Contract AGIP KCO

Practical tutorial training in Industrial and chemical maintenance (OJT), done in English for junior Engineers and Kazakh's technicians at the Total Feyzin's refinery.
Recall maintenance norm application, work with individual respiratory units. Practical rules for unit’s shutdown used while they were involved on it...
My implication, allowed the Kazakh team to be considered as a maintenance team, it was very practical and concrete. It was highly valued work of the team in comparison with that of the CAMOM maintenance team.
2004 – 2006 MAINTENANCE MANAGER & INDUSTRIAL MANAGER
FOREMAN – ROTATING EQUIPMENT

ECO TRANSF, ENDEL, GAME S-O, CEGELEC, WEYERHAEUSER, METAREG , TEMBEC Tartas , pour CRIT ETT

Progressive maintenance planning setup, general mechanic maintenance operation ranging from the follow-up of the various cogeneration units, production line) Mechanism overhaul, to update CMMW systems. Technical maintenance on a paper mill's plan and other process unit. (Various tasks on systems for recycling wood, crusher, magnet & Foucault’s system machineries (for removing metal parts) .in charge of work’s permits, scaffolding, HSE
Overhaul of Siemens Steam turbine on ASEA turbo generator 12MW
Alternative energy process work
Authoritative to work on a chemical plan
Waste water plant experience, filtration treatment, and recycling, monitoring improvement.
Procedure's improvement objectives:
• Shutdown process control before work’s permit issue.
• To define the improvement needs to the level of equipments
• To define the required specifications for the proposed modifications
• To bear engineering during the project phase
• To manage the starting phase's procedure and to start up equipments
• To write or modify the procedures affected by modification

2001 – 2003 TECHNICAL DIRECTOR (associate)

IASS Int. Londres, Monaco, Tripoly

My main task in Libya: Technical advisor for aircraft's maintenance, overhaul and upgrading. In charge of responding to technical proposals with Middle-East countries.
Test of engines, mainly in the aerospace industry but also with bids on many other technologies.
Proposal ranging from overhaul to upgrading technical installations, including Quality control plan, Spare parts research and technical recruitment, technical training. Power plan including steam & gas turbine GE, ASEA, Solar and other rotating.

1998 – 2001 INTERNATIONAL SALES ENGINEER

AS INDUSTRIE Paris./ AeroStock Le Bourget France

In charge of the second hand aircraft turbine engines and aircraft market. My main task was to develop the international trend for the company, reactivation of military connection with Middle East contract. Selection and recruitment for the aerospace industry mainly for military and foreign customers

1996 – 1997 SECURITY ENGINEER

COMPOSITES AQUITAINE (Aerospatiale group) Bordeaux

Logistic on special industrial’s waste for composite material and chemical's product, file’s management to qualify the company on ISO 14001 quality norm's (environment) Service bulletin follow-up.
Worker’s training on safety product's use and chemical's. MSDS system installation on CAD.

1995 – 1996 TECHNICIAN / FIELD ENGINEER (Contractor)

LOZAIS, SIEMPA FACTURE France

Supervision, translation, management on paper-mills overhauls. Installation of Valmet machinery (shoes press). Team manager while working on various paper mills. Technical works with composite materials repair, on maintenance pumps or breakdown….
Set up, repair or modification of various process line. Shutdown procedure, work permit.

1994 – 1995 SALES ENGINEER / CNC PRODUCT MANAGER

STOCK MACHINE TOOLS Montreal, Canada

Distributor contract negotiation for STOCK with Taiwanese and Japanese manufacturers. Numerical machine tool’s department’s installation, set up of process line and work force training. Service bulletin follow-up. CAD/CAM interface with various CNC machinery set-up.

1994 TECHNICAL RECRUITER (“head-hunter”)

TAD Technical services Montreal office, Canada

Selection and recruitment of specialist for the North American Continent mainly for the hi-tech and aerospace companies.

1993 ENGINEER

AIR-NORTH Whitehorse, Yukon Canada: DC3 & DC4 ‘s aircraft maintenance service,

Composite’s shop set-up and manufacturing from tip to tail of a composite aircraft "Glassair II". Competition of the practice on my AME with transport Canada

1989 - 1992 CONSULTING ENGINEER

CSS INT. Moncton NB Canada.
Project manager for Industry Science and Technology Canada on IRAP and AMTAP programs: quality assurance, manufacturing engineering, logistics' issues. Elaboration and course design: prepared manual and trained instructors for the use of composite plastic’s materials in aeronautics; content controlled by transport Canada. I did accomplish various engineering consulting tasks, Pass examination at UNB for my French Engineer diploma to be equivalent.

1986 - 1989 DEVELOPMENT ENGINEER. MANAGER

J.D'S AIRCRAFT & NOVA SCOTIAN MICRO MECHANICS Ltd North-Sydney, NS Canada .

Design, engineering. and testing of an amphibian ultra light aircraft build composite with carbon (Hydrolite), Kevlar and epoxy. Use of CAD/CAM, AutoCAD and Catia software. Micro-mechanic’s aerospace parts manufacturing process on 5 axis CNC machinery.

1984 – 1986 LOGISTIC ENGINEER/ COMMERCIAL

TECHNICIENS SANS FRONTIERES France

Management on various aerospace contracts. Responsible for engineering contract in aircraft/aerospace industries. Contract with CNC machineries manufacturer's

1982 - 1983 INDUSTRIAL ENGINEER

THOMSON BRANDT ARMEMENT France:

Anti-aircraft rocket Sam7 class Department Head Manager of the project.
Technology transfer of the manufacturing process to an Middle-EAST country.

1978 - 1981 MANUFACTURING QUALITY CONTROLLER, PLANER, DRAFTSMAN, MOTOR ENGINEER (classic & jet engine):

Various contracts
AMDBA, Aérospatiale, Socata, Sogerma and Turbomeca.

From mid-1980 preparation for the CESI engineer diploma.

1976 - 1978 TEAM MANAGER

Royal Air Maroc & Air force flying school

Maintenance tutor on the 1st & 2sd level

1972 - 1976 AIRCRAFT TECHNICIAN

French Air Force Technical school ETAA training 51-64(engines)

Ad
Ad
Ad