GM or Manager (telecom, energy, electrical, operation, maintenance, const., infra, oil&gas)


Last Updated: 5th September 2018 (over 4 years ago)

Address
kota, India

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Masters

Languages
English

Summary

PROFILE
 Seasoned, technically competent and highly empowered professional with incredible experience acquired over the years in diverse areas encompassing implementation of telecom / network infrastructure project, electrical system design & layout, solar & wind system design, thermal & bio-mass power generation (renewable & non renewable), planning & designing the power & utilities system; installation, commissioning and maintenance & operations of electrical & instrumentation systems, techno-commercial operations, and continuous improvement
 Handling of complete Generator, Solar, wind, Thermal based power plant erection, Operation & Maintenance.
 Experience in performing preventive/predictive maintenance and routine overhauling of various instruments & control systems, electrical & electronics utilities; routine inspections/post maintenance of the systems; preparing/standardization various engineering data as industry /regulatory codes and standards.
 Adequate understanding in the areas of Work Permit System, Quality Management System & Occupational Health & Safety Assessment and Energy Saving Initiatives; thorough understanding of ISO-9001-2008, TL9000:1994, ISO-14001, ISO-18001, 20001, TQM , TPM, Kaizen, and Small Group Activities to facilitate team work
 An acknowledged project leader with proven strengths in managing project sites, mobilizing and managing materials, machines and manpower resources to generate highest productivity levels
 Displayed explorative aptitude to design, co-ordinate and execute the projects in order to achieve quality as well as cost effectiveness; closely involved in the application of techno-commercial expertise with a target of managing overall operations; identifying vendors and negotiating with them for design modifications and cost effective installations and spares management
 Electrical Commissioning activities like 11 / 33 / 66 KV/110/220KV Switch Yard with Gear, Substation, 415V Motor Control Centre, Generator, Transformer Commissioning (min. 130 MVA), 132/220 MW Switch Yard etc.
________________________________________AREAS OF EXPERTISE
- Business Strategy Planning - Infrastructure Project Management - Operation & Maintenance
- Systems Implementation - Power Generation - Quality Systems (TPM / TQM)
- Inventory Control Management - Supply Chain Management - Construction Project
- Solar / Wind Power - Telecom Rollout/Power/O&M - Utility/CSD/Energy Management
- Steel / Automobile Plant - Construction / Stone Plant/ Cement Plant - Electronic/Power Plant/Oil &Gas
- Technical Feasibility - Cost Reduction - Process Improvement
- Budgeting / Fund Management - Liaison / Coordination - Training & Development
- Team Supervision - Resource Allocation - Commercial Operations

Education

KSOU banglore india
MTECH

   Jun 2012
— Nov 2014

Electrical

techno global university india
MBA

   Jan 2012
— Nov 2013

project and telecom

NIMT delhi
BE-Electrical

   Jan 2007
— Dec 2011

BE-Electrical

Mumbai University India
Diploma in industrial electronics

   Jul 1991
— Jul 1994

Diploma in industrial electronics

Experience

REE,Genus, KEC, AWCC, TDCA and Interkel Nigeria Ltd.,
Engineer to HOD

   Jul 1994
— Current

PROFESSIONAL EXPERIENCE AND ACCOMPLISHMENTS

RA International FZCO Mogadishu Somalia -Sept 2014 to contd.

Interkel Ltd., 12 Maitama Sule, Off Awolowo Way, S/W Ikoyi, Lagos, Nigeria Sept. 2011-Aug. 2014
Designation: Head- Africa

Telecom Development Company Afghanistan Ltd., T/A Roshan, Kabul Afghanistan Aug 2008-Aug. 2011
Designation: Manager –(Infrastructure, Operation, Maintenance & Electrical)

Almoayed Group (Bahrain), Afghanistan Oct 2005 – July 2008
Designation: Power Consultant – O&M, Planning & Designing (TDCA Ltd., Kabul Afghanistan)

Afghan Wireless Communication Company Kabul, Afghanistan May 2003– Sept 2005
A part of Telephone system International Inc. Ltd., New York (USA)
Designation: Manager – Electrical & Aircon

KEC International Ltd., Jaipur (India) Jan ’99 - May ’03
(A Part of RPG Group (India))
Designation: Maintenance Engineer (HOD Electrical & Electronics)

Genus Power Infrastructure Ltd., Jaipur (India) Jan ’96 - Dec ’98
(A part of Kailas group)
Designation: Assistant Engineer

Rajasthan Electrical Engineer’s KTPS RSEB Kota (India) Jul ’89 - Jun ’91 & Sep ’94 - Aug ‘95
Designation: Maintenance Supervisor

ISO:

 Certified Management Representative of ISO9001:2008, TL9000:1994 & QMS.

Present & Past Responsibilities in brief:

Telecom:
 Actively involved in executing a Telecommunications Project of Network Swap in Afghanistan & Nigeria.
 Handled swap with Nokia Siemens, Alcatel, Ericsson & Huawei ; Network Power Deployment, Operation, Maintenance & Construction
 Handled all types of Power System Design, Installation, Commissioning and Maintenance like Solar, Wind, City Power, PHCN, Power Auditing, FCU, DC Aircon, PIS, SIMS, IPMS, INALA, AVR, SPD, SRF, Fuel Monitoring, USMS, Hybrid Solution, Batteries, Inverter, Stabilizer, VDTC, GOC, MDB, DB, SDB Type Systems
 Successfully handled Installation, Commissioning, operation & Maintenance of
- Generator Sets, Aircon units, HT & LT panels, Synchronization system, Rectifier, UPS, MDB, DB’s, SDB’s, Cabling, STS, ATS, Battery Bank for GSM, SMSC, IVR, IN & whole network etc.
- 11KV/440V substation; Utilities & Power equipments installed at the MSC, BSC & BTS sites
- Electrical Systems & Equipments like Alternator, MV Switchgears, LV Switchboards & Panel boards, lighting & its related control panels, ATS, MCC, MV and LV cables and wirings, etc.
- Light current electrical systems and equipments like UPS, CVT, Fire Alarm, CCTV, Access Control, Telephone, etc.
- Siemens KKT-Kraus 6000 DUO & KC 2000 shelter type aircon units, Centralized aircon units, Split aircon units, Window type aircon units, Kooltronic Make panel mounted aircon units & Brad manufacturing shelter aircon units for offices as well as different BTS, BSC & MSC sites
- Handled Motors, Air compressor, other Electrical equipments, Mobile cranes, Fork lift, Centrifugal pump, Grinder, Welding m/c’s, vacuum cleaner and utility systems
 Involved in Installation & Planning for New GPDF & Battery banks for Switch, spares planning & management, indenting & procurement, Annual Capex & Opex budget planning
 Prepared specification of brought out items such as control panels, bus communication equipment, PLC, cabling, temperature equipment, Generator, transformers, switchgear, switchyard equipment, lighting communication, power distribution, cabling, Earthing, cable tray, Instrumentation etc.
 Supervised a team of vendors, Engineers, Supervisors, FS & AM of all different regions.
 Handled savings of OPEX in all BTS/BSC/MSC/GH/Houses locations.
 Successfully executed up-gradation of rectifiers/UPS/DG sets at MSC/BSC/BTS locations.
 Operation & Maintenance of all Passive equipments 1600 GSM sites in Afghanistan & 1500 GSM sites in Nigeria.
 As Coordinator of ISO-9001 for the Electrical Department, accountable for documentation on ISO-9001 & ISO-14001.
 Responsible for MTTR, PM, PPM, Outage, Penalty, weekly & Monthly presentation, Fuel etc. of all Indoor/Outdoor/MSC/BSC/BB sites.
 Responsible for cell availability, reliability, efficiency and generation as per agreed MOU target within the quality norms.
 Responsible for repair and maintenance cost as per MOU targets and bring about cost reduction by different productive means.
 Coordinate with fuel management, maintenance planning, and operation and efficiency activities in the plant.
 Managing technical and administrative problems related to operations and maintenance in the company.
 Resource planning for O&M, fuel management, O&E and MTP manpower, materials and annual contracts.
Electrical, Power Plant, Building Services, Utility, Construction, Industry, Oil & Gas:

 Experience of detailed engineering and design to the point where the data can be drafted by others. And also have an exp. Of Area Classification, Single Line Drawings, Layouts covering all categories, Raceway systems (all categories), Schematics (Ladder type), and interconnection drawings, Schedules such as cable, lighting, panel, terminations and similar and have a knowledgeable with North American engineering concepts, practices, equipment and materials. Engineering expertise must include the development of equipment and material specifications covering the complete spectrum of power distribution products required for industrial projects. Applicant must be capable of developing purchasing requisitions and undertake the subsequent bid evaluations. Applicant must be:
 Involved in various maintenance activities like
- Mechanical Maintenance including maintenance of Hydraulic, Pneumatic and Mechanical Machines
- Experience of Construction & maintain of new overhead transmission lines, Construction & Maintain of 110KV/220KV substation etc.
- Civil Maintenance including maintenance of roads & building, water supply & sanitation, miscellaneous constructions, garden and plantation etc.
- 132KV Switch Yard, 6.6 KV Double Bus Bar MV Board, Transformers & their protection up to 28 MVA (Make: Bharat Bijlee), SF6 Circuit Breakers of rating 1250 A [ELF SF2-1(r)] & HPA 12/ 3140 CF & VRC-7 of rating 630A & 450A (Make: ABB), ACB up to 2000A (Make: GEC), ACB up to 800 A [CN-CS-800C] (Make: L&T), MV Board(ABB & SIEMENS), P.C.C(ALSTOM & L & T), BCH, L & T make MCC, Pioneer make LRS & LRCs, GRS, Vapromatic LRS, Protection relays:ABB, English Electric, SIEMENS(SIPROTEC) relays
- Kirlosker/ BHEL make H.T. motors (475 to 2600 KW) and KEC / SIEMENS / CG / DEMAG / GEC / SEW make L.T. Motors.
- Overhauling of motors at Electrical workshop (HT, LT slip ring & squirrel cage & DC motors), MV motors(up to 2600KW, KEC/ BHEL make), D.C. motors (up to 950 KW, KEC make), LT motors(up to 250KW KEC, CG, SEW, BBL, GEC make)
 Involved in the development of vendors, reconditioning and development of special purpose machines and accessories
 Implemented TPM in KEC Jaipur as Pilot Project across entire organization
 Member of Project Team during commissioning of new crusher & screening plant- erection, commissioning of 1400KW BHEL motor, 1600KVA transformer, PCC & MCC including 45 drives
 Centralized air-conditioned plant, Water Cooler, Both AC&DC Welding M/C’s , EOT cranes, Control panel’s, Hoist’s, Induction & Squirrel cage induction motor, DG set’s, Halogen Light’s, Timer’s, Boiler control panel’s, 220KV switchyards & lightening system of all plants.
 Erection & Maintenance of 2x110MW and 2x220MW power plants of the Kota Thermal Power station.
 Experienced with commissioning electrical systems and plant start up procedures
 Exp. Of logically developing via well documented appropriate calculations all of his engineering conclusions and decisions
 Exp. of functioning well in a multi cultural environment
 Developing calendar for commissioning of equipment, sub-system and system in association with project head / erection agencies as per erection progress.
 Plan, setup, coordinate and implement commissioning procedures (pre-commissioning and commissioning).
 Responsible of proper protocols for Commissioning towards checklist, test reports are available.
 Responsible of commissioning is done to satisfy O&M requirements on long term basis.
 Coordination and communication with agencies / contractors / vendor representatives to ensure timely completion of works allotted
 Review and monitor outsourced agencies/contractors/vendors commissioning activities vis-à-vis contract
 Understand and ensure availability commissioning spares / consumables / water / startup power / secondary fuel/ auxiliary power during commissioning are adequately available
 Troubleshoot any key technical issues and guide the team / contractors for ensuring timely completion
 Identify training and development needs of the team members and plan their training and development and follow up implementation.
 Co-ordination and communication with local authorities for the supply of electricity to sites.
 Prepare and submit applications for electricity supply with the relevant utility provider/authority.
 Communicate and liaise with the approved contractors and clients, in regard to electrical supply requirements and documentation•
 Manage contractors responsible for the electrical supply, installation and testing, including the civil work pertaining to the laying of electrical cables.
 Responsible for Water Treatment plants, Water distribution systems, swimming pools, air-conditioning systems, mechanical, electrical, civil building maintenance work, firefighting system, access control system, lifts, PABAX, LAN, Satellite TV, power generation & distribution system etc.
 Responsible for oil & gas sector electrical work.
 HVAC, Chiller, Installation, Operation & Maintenance work .

Solar & Wind Power System Major Achievement:

 Design, Planning O&M of 100No. Solar system in Afghanistan and 10No. Solar system in Bangladesh.
 Responsible for selection of right vendor for execution of site related contractors for structural work, civil work and transmission line related works.
 Manage Small-size to large (5kW to 10MW) commercial solar projects in public and private sector
 Coordinate subcontractors required to complete a project
 Responsible of selection of right technology in solar and also responsible for to do du-diligence of various items to be procured like Module, Inverter, battery, ATS, controller, connectors, rectifier, racks etc.
 Responsible to build a team of his own to execute solar project for the firm.
 Experience can be either in Engineering, Procurement and Construction (EPC) or in selection of appropriate modules, inverters and other items for solar projects.

New Projects, Business Development & General Management :

 Responsible for all new power project start to end like survey, planning, scope of work, vendor selection, man power allocation, P.O., service order, work implementation, snags clearance, as built, handover, invoicing, payment follow up etc.
 Sales and marketing for new business development for company.
 Responsible for General Management, handling the operations, commercial and financial aspects of a Telecoms service provider in a developing country dealing with emerging markets. Also have a experience of negotiate at a high level with the regulators, and other key players and stake holders. This is a company with young, dynamic individuals dealing with cutting edge technologies.

Previous Responsibilities in brief:

KEC International Ltd., Jaipur (India)
 Electrical and Electronics Maintenance
 Mechanical Maintenance including maintenance of Hydraulic, Pneumatic and Mechanical Machines
 Civil Maintenance
 Modernization and Development
 Liaising with Government Offices such as Department of Legal Metrology
 CNC Machines Installation, Operation & Maintenance
 Continuous Process (Galvanizing) Maintenance
 TPM Implementation
 Installation, Commissioning, Troubleshooting and maintenance of PLC
 Operation & Maintenance of Electrical Substation both HT & LT Site
 Operation & Maintenance of all plant electrical equipments.

Genus Power Infrastructure Ltd., Jaipur (India)
 Handling of new projects & Ensuring trouble free running of machines
 Documentation & implementation of ISO-9001 standard
 Spares control & Planning
 Testing, calibration & debugging
 Design of jig’s for any type of HMC’s & electronic circuit testing
 Operation & maintenance of cooling tower & Utilities systems
 Designing, testing, fault finding and repairing 3ph. and 1ph. Electronic energy meter.

Rajasthan Electrical Engineer’s KTPS RSEB Kota (India)
 Installation, Commissioning, Operation and Maintenance of centralized air-conditioned plant, cooling Plant & utilities systems
 O&M all electrical/boilers/HVAC, AC systems.
 Supervision & job allocation of all employees work in this organization
________________________________________

ACADEMIC AND PROFESSIONAL CREDENTIALS

2012-2014 M-Tech in Electrical From Karnataka State Open University Bangalore India
2011-2013 MBA in Telecom & Project Management From Techno Global University Shillong, Meghalaya India.
2012-2021 Electrical Supervisor/Inspector License From Govt. Of Rajasthan (India) (No.:7766 valid up to 27.07.2021)
2012 Certified Management Representative of ISO9001:2008, TL9000:1994 & QMS. Lagos Nigeria
2007-2011 B.E. in Electrical from Neptune Institute of Management & Technology Institution New Delhi India
Jan11-Dec11 Diploma in Fire & Safety from EIILM University Sikkim (India) (Certificate Course)
1991-1994 Diploma in Industrial Electronics from Board of Technical Examination, Mumbai (Maharashtra), India
1988-1989 Senior Secondary from Board of Secondary Education, Aimer, Rajasthan, India
1986-1987 Secondary from Board of Secondary Education, Aimer, Rajasthan, India

Training & Development

 Trained on CNC machines Software like (Nov. 2001) OS2 system, X-Tel System & PL7_3 for fault finding in PLC Processor (TSX47420/67420) through Ladder” (PLC Software on Vernet behringer France)
 Trained on CNC machines in KEC International Ltd., Butibori Nagpur (Maharashtra)
 Six months Computer Hardware & Maintenance Course from Unique Technologies Services Kota
 One week (19th Aug. 08 to 24th Aug. 2008) Rectifier & Solar system training by ZTE China
 Certified from ZTE china for solar project manager, received certificate.

Technical Skills

 IT system planning like data port, IT Cisco switches, Patch Panel, Cat-5 & cat-6 cables, IP phone etc
 Windows-XP, MS-Project, MS-Excel, MS-Word, MS-PowerPoint etc.
 AutoCAD 2006 (Normal)

________________________________________

Search Jobs by Industry

Ad
Ad
Ad