Instrument Engineer


Last Updated: 26th August 2017 (over 5 years ago)

Address
Amghara, Kuwait

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
35 to 44

Qualification Level
Degree

Languages
English

Summary

HAMIDULLAH KHAN

Post Applied for: Instrument Engineer.
Objectives: To seek a challenging position in reputed organization where I can utilize my experience and technical skills in the world of Instrumentation.

SYNOPSIS: Presently working in Alrashed Group of projects Holding Co. KSCC North Kuwait in oil and gas project as Instrument Engineer.
Overall 8 Years’ Experience in System & Field, Pre Commissioning, Commissioning, Maintenance, activities at various Plants like Gas Plants. And worked in different countries India, Saudi Arabia, Kuwait.
Areas of Knowledge: - DCS, ESD, PLC, Pre-commissioning and Commissioning, Loop Checking, Troubleshooting, Calibration, Maintenance, Test Documentation and Instrument Data Base.

SYSTEM AND INSTRUMENTS HANDLED

 DCS: Invensys with Foxboro,
 Provides require information regarding the applicable available codes $ project standards, identifies additional requirements for the project and participates.
 Review any new standards developed by the consultant and finalizes the applicable electrical engineering standards relevant to the project
 Participate in review and approval process of plot plan , LCR location CCT and work station Design and analyzer house
 Transmitters: Honeywell, Fisher-Rosemount, Yokogawa, Siemens, Foxboro, etc.
 Control Valves: Fisher, Mason élan, Semen’s etc.
 MOV’s: Rotork.
 Fire Alarm system: Dragger.
 Flame Scanner: Dragger and Pressure Relief Valve
 Special type Level Transmitter: GWR, Saab Tank Radar.
 Foundation Field Bus Transmitter: Emerson, yokogawa etc

Qualification:

 Bachelor of technology from Instrument & Control Engineering with Distinction (70.79%)
 Having Automation course which includes PLC and SCADA programming, from Prolific system & Technology Delhi
 Safety course IOSH from Kuwait

Gulf Experience:
1. Name of company. : AL-Rashed Group for Projects and Holding Company. W.L.L. Kuwait
Position : Instrument Engineer
Duration : November 2013 to till date

Job Responsibilities

• To know Cable tray installation and checking of PID loop control
• Instrument test report activities from HMI
• Participate during EPC phase in the detail design of the project
• Also, know Installing, servicing, testing and troubleshooting of VFD, flow meter, Level control.
• To prepare general notes requisitions for instrumentation.
• Prepare a project instrument index in accordance with the flow sheets
• Attend coordination meetings and engineering review meetings with supplier as required
• Testing, troubleshooting and maintenance of deluge systems interfaced with PLC and DCS
• Follow up instrumentation construction work on project sites to ensure correct interpretation of designs regarding installation. Resolve any Instrumentation problems arising during commissioning.
• Troubleshooting, checking fire and gas connected to Allen Bradley PLCs, FSC and SCADA
• Installation of field instruments as per P&I drawings
• Calibration of different sensors like thermocouples, RTDs
• Maintenance of fire water monitoring system interfaced with DCS and PLC
• Maintenance of transmitters like pressure, flow, levels
• Handling of SSLS system and Motor Operated Valve
• Loop checking with the help of P&ID
• Inspection, managing and handling man power tools and instruments.
Having good knowledge on testing equipment’s like HART communicator, and Dead weight tester, pressure and process calibration

2. Name of company : Match Healthy Water, Makkah (K.S.A)
Position : Instrument Engineer
Duration : 03 February 2012 to 03 Jun 2012

Job Responsibilities

• Has work on the Field Instruments and Control systems for Automation
• Omron PLC programming in Automatic Packing Machines
• Allen Bradley and Siemens PLC programming, VFD installation and commissioning, HMI programming and Design
• Instrument test report activities from HMI
• To control plan schedule and execute the daily work
• Participate in final walkthrough with client.

Experience in India:

ASW Project PVT.LTD New Delhi
Project: NTP Project
Company: Asw Project Pvt. Ltd., Designation: Instrument Engineer, Period: (August-2009 To January 2012)

Summary:
 Familiar with Instrumentation and Control Engineering work related to Installation, Pre-commissioning and Commissioning of petrochemical, Refineries, Oil and Gas industries.
 Good understanding of the logic for simulation as per commissioning requirement. Good understanding and interpretation of instrument loop drawings, P&ID, Cause and Effect drawings.
 Responsible for Logic checking & Functional test during Start up of plant, by Coordinating and troubleshooting the system both DCS and PLC. Responsible for final loop checking and Functional Test.
 Extensive knowledge in Control System and worked on DCS 3000, Instrument Protective System and Programmable Emergency Shutdown System. Having good knowledge and familiarity in the above system.
 Coordinating with Operation department of plant during start up & routine maintenance activities as per specification and data with reference of P& ID Drawings
 Responsible for functional system checkouts for DCS and ESD (Emergency Shutdown system) for Interlocks of DCS, ESD, Fire and Gas system.
 Responsible for mapping and verifying the I/O data as per the plant requirements.
 Responsible to ensure all Instruments and Control System are maintenance to a higher degree of Safety and Operational availability in accordance with company Standards, Codes and Practices.
 To ensure that Project Quality Objectives are achieve, QA/QC policy &General requirement and covering the Engineering, Procurement and Construction phase of project.QA/QC Procedures and practices fully enforced.
 Responsible to perform and Supervise Calibration of Instrument and control valves according to Ranges, Alarms and Trip Set points.
 Monitor and Co-ordinate work at site during Pre-Commissioning Activities
 Involved in construction Activities like, junction box installation
 Testing and maintaining the record of the Primary and Secondary Cables.
 Responsible to verify instrument and valves within specification and data sheet.
 Responsible to review of hookup, electrical and process connections, pressure testing of instruments and valves for impulse line and airline.
 Responsible for installation & testing of primary and secondary junction boxes. Secondary and branch Cable, Foundation Field Bus Cable, Fiber Optic Cable. Modification of offers based on discussions with Client and follow up with client through technical discussion. Preparation of activity Charts for project execution.
 Installation of marshaling cabinets for DCS.
 Functional Checks for All Interlocking Systems.
 Coordinating with Operation and maintenance of plant as per specification and data sheet of the instrument and valves.
Computer Skill:
Familiar with all Office Tools like MS-Word, MS-Excel, MS-Access, MS-PowerPoint and Windows 2000 Exp. operating system.

Personal Details;

ACADEMIC RECORDS

ACADEMIC UNIVERSITY/
BOARD YEAR OF PASSING PERCENTAGE
B.Tech. Dr. B.A.M.U. 2009 70.10%
12th Allahabad (U.P) 2005 62.60%
10th Allahabad (U.P) 2003 63.50%

Personal Traits:
Always willing to Acquire Knowledge high degree of adaptability, God communication Skills oriented towards hardworking, and achievements of positive results in the task and goals assigned and targeted.

Education

Maharashtra Institute of Technology Aurangabad
Instrument & Control engineering

   Jul 2005
— Aug 2009

i get admission in 2005 in Instrument & Control Engineering department and finish within academic year 2009 with 70%

Experience

AL-Rashed Group for Projects and Holding Company. W.L.L. Kuwait
Instrument Engineer

   Aug 2009
— Current

currently working in oil and gas company in maintenance department project is EPF-120 North Kuwait as Instrument Engineer.

Ad
Ad
Ad