Sultan's CV

Last Updated: 11th February 2019 (over 3 years ago)



Phone Number


Age Range
25 to 34

Qualification Level

English, Hindi, Punjabi, Urdu


I have more than eight (08) years working knowledge and experience as a Lead HSE both in design (loss prevention & risk management) & operation safety with the objective of achieving safe design and operation of facilities as per project/statutory codes and requirements. I also I have sound & diversified experience of:
Work place Risk Assessments for the identification of hazards, hands on experience in risk mitigation and prevention control;
Loss Prevention & Risk Management competency
Incidents Investigation & root Cause Analysis through different Techniques;
HSE Management System Revamping based on 12 policy elements of PSM;
HSE Management Systems audits, preparations of audit reports and follow ups for the close out of audit findings.


University of the Punjab
Chemical Engineering

   Sep 2006
— Jul 2010

Chemical Engineering, Nebosh IOG, Nebosh IGC, Lead auditor ISO 14001:2015, OHSAS 18001:2007, ISO 45001:2018, PSM


Descon Engineering
Lead HSE

   May 2014
— Current

DESCON ENGINEERING LIMITED (From 28-May-2014 to Present)
As a Lead HSE: (From 1-Nov-2016 to present)
Currently working in Descon Engineering Limited (EPC Division) as a Lead HSE” on Oil & Gas and Power projects.
As a Lead HSE reporting to Division head HSE and my duties include but not limited to following:
HSE Performance Monitoring of all EPC Projects (local & overseas). HSE performance analysis on monthly, quarterly & annual basis to draw trend analysis and advise relevant project sites team to take actions against the gaps;
Monitor the implementation of Site specific HSE Business Plan, Field HSE Plan, Environmental Management Plan and Emergency Response Plan. Provide support for conducting Critical activities Risk Assessment & contractor pre-qualification. Coordinate with Site team to implement HSE Management System in true letter & spirit;
Develop annual internal audit plan at Division level and ensure its implementation to confirm the compliance of HSE Management System;
Division IMS certifications maintenance by dealing with internal stakeholders & certification body. Also follow up for closure of external audit action items.

As a HSE Engineer: (From 28-May-2014 to 31-Oct-2016)
As a HSE Engineer my job responsibilities included but not limited to following:
Loss Prevention Competency (Fire Water & Foam demand calculation, Conceptual layout of Fire Water network, Fire Water system P & ID, Fire zone mapping, F & G mapping, Fire water pump specifications, Fire Scenario Envelop, Firefighting equipments layout, Emergency Evacuation route design, Passive Fire protection requirements, Hazardous area classification etc. on the basis of different standards & code of practice e.g. NFPA, API, IP, ANSI, ISO, ADNOC CoP);
Risk Management (HAZOP Study, HAZID Study, SIL Assessment Study, Hazard Identification & Risk Assessment, Why Tree Analysis, Cause & Effect diagram, Fault Tree Analysis, Event Tree Analysis, PSSR, Project HSE Review, Safety cases, HSEIA etc.);
Lead QIT (Quality Improvement Team) to improve quality culture within department and conducted QHSE audits as a lead auditor/auditor to ensure the compliance of IMS certification requirements & QHSE Management System.
Completed Projects
ADCO Tie-in works at south east (Package-B)
Client: ADNOC Onshore
ADCO SAHIL Phase-II development
Client: ADNOC Onshore
LPG & LNG Recovery Plant (ADHI-III) Project
Client: Pakistan Petroleum Limited (PPL)
LPG & LNG Recovery Plant (Gambat) Project
Client: Pakistan Petroleum Limited (PPL)
FERTIL-II Bagging & Truck Loading Facility Project
Client: RUWAIS Fertilizer
75 KTPA Light Soda Ash Project
Client: ICI Pakistan

National Refinery
HSE Engineer

   Jul 2010
— May 2014

NATIONAL REFINERY LIMITED (From 20-July-2010 to 05-May-2014)
Worked in National Refinery Limited Karachi (The Pakistans Largest Petroleum Complex) for approximately four years on the following units as a HSE engineer:
MEK De-Waxing of Lube Oil;
Hydro finishing of wax free oil Unit;
Hydrogen Generation Unit;
BTX (Benzene, Toluene & Xylene) preparation by Shell Sulfolane Extraction process;
Furfural Extraction Unit.
My job responsibilities included but not limited to following:
Report Daily HSE status to Manager;
Ensure implementation of HSE Policy, PTW system and PPEs compliance for the well-being of all employees, contractors, members of the public and visitors to the company.
Conduct/refresh training on Emergency Response & Evacuation Preparedness, conduct Mock drills and ensure compliance of legal & other requirements;
Communication with Operation, Maintenance and Project consultants on HSE matters;
Coordination for Emergency and Crisis Management Program;
Update Emergency Response Plans;
Member of HAZOPs study team for plant modification;
Conduct quarterly base audit;
Maintain IMS by continuation of ISO 14001/ OHSAS 18001 certifications;
HIRAC of the whole plants;
Preparation/review of HSE SOPs;
Investigate incidents and prepare report.

Search Jobs by Industry