Provide an over-all assessment of the EP inspector and supplier performance as per the contract requirements and applicable codes/standards.
Detailed review of ITP – establish / confirm EP Contractor inspection and Shell assessment intervention point
Verify / confirm supplier QC and EP Contractor’s inspector are performing their required activities, as indicated on the ITP.
Select a critical process (possibly one of the following: document revision control, quality records, material receiving and traceability, welding / NDE, heat treating, pressure testing, coating, etc.) and conduct a high-level “mini-audit"
Evaluation of EP Quality representative’s understanding of scope of supply, type of equipment, supplier manufacturing / fabrication / quality management, industry codes / standards.
Conduct a cursory inspection of the equipment and report any issues identified.
Following the Shell Life Saving Rules, supplier site requirements (PPE, evacuation routes, muster points, etc.), and reporting any areas of concern.

Review all the documentation carefully and familiarize with the Purchase Order (PO), Material Requisition (MR), Inspection Test Plan (ITP), Client Engineering Specifications, and other applicable standards.
Check traceability, review the heat numbers and confirm that they match the data sheets.
Confirm that the approved procedures are being followed and that the procedures align with the Client Specifications and Client referenced standards.
Confirm that the test results meet the Client Specifications and Client referenced standards.
Check the qualification of the welders and NDE technicians performing welding and inspection on this order.
Confirm that the test equipment is calibrated.
Confirm that equipment and consumables such as welding machines are being utilized with the specified parameters and welding rods are stored according to the manufactures specifications.
Random visual/Dimensional verification, In process inspection, NDE Review, Weld monitoring with areas inspected identified, Raw material and traceability verification, coating inspection, Review data book

Perform supervision of the works done by the contractor during the different stages of construction of different equipments in 3 Fix production Platforms: i.e. fit-up, dimensional inspection, welding visual inspection, nondestructive testing, corrosion protection, assembly, load Test, Hydrotest inspection, review iso drawings vs P&id`s, follow the schedule according to the project, discuss with the contractor about new ideas, verify all works according to codes, specs and customer requirements, verify compliance with weekly targets.

Perform supervision of the works done by the contractor during the different stages of construction including,
qualification of welders, receipt of materials, prefabrication, dimensional inspection, welding visual inspection, corrosion protection, nondestructive testing, assembly, testing for leaks, according to codes, specs and customer requirements as well as review activities documentary and book project integration.