Measurement/ Instrument engineer


Last Updated: 23rd December 2017 (over 4 years ago)

Address
India

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
25 to 34

Qualification Level
Degree

Languages
English, Gujarati, Hindi

Summary

 Supervise and perform corrective preventive maintenance and corrective maintenance on field instruments. To oversee maintenance activities carried out by technicians and provide technical support with that Supervise that work is carried out in accordance with complex QHSE policy and procedures.
 Did Hook-up and commissioning of projects for LACT skids, Batching skids, Provers, SCADA / HMI installation and FSM systems.
 Hands on experience in Daniel Products such as Flow Meters (Ultrasonic, Turbine & Orifice), Flow Computers, Control Valves, Gas Chromatographs, Compact Prover, Density meter, Mass flow meter used in custody Transfer Metering in Desert, Onshore and Offshore Sites.
 Achieved experience in Field Instrumentation Devices such as Transmitters (Pressure, Temperature, DP, etc), RTD (Pt-100), Density Meter, HMI System (Specially designed for Custody Transfer Metering Application) etc at company workshop and customer locations.
 Configuration, calibration, loop checking & maintenance of intelligent Pressure, Flow, Level and Temperature Transmitters (FOXBORO, ROSEMOUNT, ABB etc.) with HART communicator and Scandura.
 Instrumentation System & Field Instrument Handling of Master Calibration Bench and Test Equipments tools like, Scan Dura, Model B-20/IS, Druck 4-20 Loop Calibrator & Dead Weight Tester, Foxboro hand-held terminal HHT, HART Communicators 475, 375 & 275.
 Knowledge of preparation document like loop schematics, wiring schemes, P&ID Drawing, installation drawing, cable schedules Instrument Index, I/O List (PLC, DCS & ESD), Cable Block Diagram, Instrument Datasheets, Junction Box wiring detail, Instruments & Conduits Location Layout drawings etc.
 FAT (Factory Acceptance Test) & SAT (Site Acceptance Test) co-ordination with Customers and Consultants
 Knowledge of relevant AGA, GPA, API, ISO etc standards associated with fiscal and custody transfer metering systems for oil & gas measurement
 Monitoring of hydrocarbon gas using gas chromatograph (C6+ and C9+). Preparation of daily progress report (DPR), trip sheet & time analysis
 Services and Maintenance of Gas Chromatograph like Tuning, Valve Rebuilt, SOV Replacements, and Electronics Replacement in relevant Equipment.
 Check Average Metering Reports and done maintenance of Metering Instruments (GC, USM, FC, PT and TT) on monthly basis at Natural Gas Processing Plant
 Application Modification of Honeywell SCADA System R-400 and GC Ifix HMI which is used for continuously monitor process variables.
 Involved in ROXAR projects as a supporting engineer for FSM system installation and Hookup-commissioning.
 performing root cause failure analysis (RCFA) on equipment failures and recommending corrective actions on instrumentation and electrical equipment and corrective action on deficient equipment.
 Involved in gas chromatograph performance analysis test which has been performed by Effectech UK as an OEM representative.
 Did witness and service as OEM experts for flow meters turbine and USM calibration activity held in GAIL which is certified by NMI, NMI and NABL.
 Successfully did commissioning of 98 to 99% Concentrated HCL and H2SO4 batching skid in VOPAK tank farm unit with zero injury.
 Find out Hardware and software product issues and report to factory and solved by involving factory representative.
 Installed and Commission Gas chromatograph and flow meters skid in ONGC C2C3 Cracker unit, Petronet LNG (Biggest RLNG unit in india), OPAL petrochemical refinery, Reliance industries Jamnagar.

Experience

Emerson Process Management
engineer

   Jan 2014
— Current

 Supervise and perform corrective preventive maintenance and corrective maintenance on field instruments. To oversee maintenance activities carried out by technicians and provide technical support with that Supervise that work is carried out in accordance with complex QHSE policy and procedures.
 Did Hook-up and commissioning of projects for LACT skids, Batching skids, Provers, SCADA / HMI installation and FSM systems.
 Hands on experience in Daniel Products such as Flow Meters (Ultrasonic, Turbine & Orifice), Flow Computers, Control Valves, Gas Chromatographs, Compact Prover, Density meter, Mass flow meter used in custody Transfer Metering in Desert, Onshore and Offshore Sites.
 Achieved experience in Field Instrumentation Devices such as Transmitters (Pressure, Temperature, DP, etc), RTD (Pt-100), Density Meter, HMI System (Specially designed for Custody Transfer Metering Application) etc at company workshop and customer locations.
 Configuration, calibration, loop checking & maintenance of intelligent Pressure, Flow, Level and Temperature Transmitters (FOXBORO, ROSEMOUNT, ABB etc.) with HART communicator and Scandura.
 Instrumentation System & Field Instrument Handling of Master Calibration Bench and Test Equipments tools like, Scan Dura, Model B-20/IS, Druck 4-20 Loop Calibrator & Dead Weight Tester, Foxboro hand-held terminal HHT, HART Communicators 475, 375 & 275.
 Knowledge of preparation document like loop schematics, wiring schemes, P&ID Drawing, installation drawing, cable schedules Instrument Index, I/O List (PLC, DCS & ESD), Cable Block Diagram, Instrument Datasheets, Junction Box wiring detail, Instruments & Conduits Location Layout drawings etc.
 FAT (Factory Acceptance Test) & SAT (Site Acceptance Test) co-ordination with Customers and Consultants
 Knowledge of relevant AGA, GPA, API, ISO etc standards associated with fiscal and custody transfer metering systems for oil & gas measurement
 Monitoring of hydrocarbon gas using gas chromatograph (C6+ and C9+). Preparation of daily progress report (DPR), trip sheet & time analysis
 Services and Maintenance of Gas Chromatograph like Tuning, Valve Rebuilt, SOV Replacements, and Electronics Replacement in relevant Equipment.
 Check Average Metering Reports and done maintenance of Metering Instruments (GC, USM, FC, PT and TT) on monthly basis at Natural Gas Processing Plant
 Application Modification of Honeywell SCADA System R-400 and GC Ifix HMI which is used for continuously monitor process variables.
 Involved in ROXAR projects as a supporting engineer for FSM system installation and Hookup-commissioning.
 performing root cause failure analysis (RCFA) on equipment failures and recommending corrective actions on instrumentation and electrical equipment and corrective action on deficient equipment.
 Involved in gas chromatograph performance analysis test which has been performed by Effectech UK as an OEM representative.
 Did witness and service as OEM experts for flow meters turbine and USM calibration activity held in GAIL which is certified by NMI, NMI and NABL.
 Successfully did commissioning of 98 to 99% Concentrated HCL and H2SO4 batching skid in VOPAK tank farm unit with zero injury.
 Find out Hardware and software product issues and report to factory and solved by involving factory representative.
 Installed and Commission Gas chromatograph and flow meters skid in ONGC C2C3 Cracker unit, Petronet LNG (Biggest RLNG unit in india), OPAL petrochemical refinery, Reliance industries Jamnagar.

Transit Electronic pvt Ltd.
engineer

   Aug 2013
— Dec 2013

CCTV, PA and access system engineer.

Ad
Ad
Ad