Bachelor of Technology (B.Tech) in Electrical and Electronics Engineering in May 2002 from Kakatiya University, Warangal India

1. Organization : Projacs
Position : Senior Electrical Engineer
Duration : June 2013To Till
Project : 1) Al Hayatt Regency Hotel (Swailem Tower)
2) Gwayieyah Mall
3) Badiah masjid, Villa

Responsibilities:

• Witnesses the daily inspections to ensure the works is going as per
the approved shop drawings, as per contract and applicable codes,
standards and specifications.
• Reviewing contractor-submitted shop and as-built drawings, and
coordinates with the concerned departments for resolving issues and
obtaining their approval and for their comments.
• Inspection of power cables, Transformers , panel boards, Internal and
External and Façade lighting system and their control, fire alarm system,
cctv system, Emergency power system with generator, Central battery
system, BMS system, mcc system, Access control System, Voice and Data,
Public Addressing and Audio visual system.
• Attending meetings with the contractor and sub-contractors to resolve
Interfacing problems during construction and attending the Work progress
meeting in PMC with Client.
• Inspecting Contractors Electrical Installation and Testing Activities and
providing clearance for approved works.

• Witnesses all testing, pre-commissioning, commissioning, and start-up
activities to assure contractors compliance with the approved plans and
procedures.
• Inspecting incoming material Invoices and Billing invoices for payments for
work progress submitted by contractor

2. Organization : Pilog Saudi International
Position : Electrical Engineer
Duration : April 2011 To May 2013
Project : Yanbu Aramco Sinopec Refining Company
(YASREF)
ID Number : C-724211.

Responsibilities:

• Handling Electrical Work With help of Drawings
• Installation of Sub-station, Main distribution panel boards, Sub distribution
Panel boards
• Installing different types of lighting fixture with different switches and outlets and lighting post on roads.
• Monitoring Telephone and data cable lay out and out-lets for data and Telephone Units.
• Monitoring the installation of Addressable Fire alarm annunciator(Repeater) panel with controls Smoke detectors, Heat detectors, sprinkler head, Beam detectors and HVAC System(Shut down)and Fire Fighting unit.
• Preparing of work Schedule coordinating with consultants and sub- contractors
• Preparing of daily and weekly progress report

3. Organization : Fahad .A AlBlehed Contracting Est.
Position : Electrical Engineer
Duration : August 2006 To March 2011
Project : Fahad villa’s and American compound

Training Details:

Under gone training with Current Technologies International GmbH Based on Power line communication product in Magenwil, Switzerland.

Responsibilities:

• Installation of the power line products using conductive and inductive techniques.
• Installation of Medium and low voltage Head-ends, gateways in the distribution panel using ferrites for signaling.
• Installation of the CPE's in customer room’s premises for accessing the Triple play (Data, voice over IP and Video on Demand).
• Installation of the IP cameras units for monitoring.
• Installation of software for monitoring the Devices as well as IP cameras.

4. Organization : Abdul Aziz Al Traiki &Partner’s Trading &Contracting Company Ltd. (A.P.T.C)
Position : Site Electrical Engineer
Duration : November 2005 to July 2006
Project : Operation and Maintenance Center
(Royal Commission for Jubail & Yanbu)
Contract No. 691-C19
Responsibilities:

• Handling Electrical Work With Shop Drawings
• Installation of Sub-station, Main distribution panel boards, Sub distribution
Panel boards.(Range of Substation 1000KVA 13.8Kv – 400/231v) and
Electrical cable layouts in the site and buildings
• Installing different types of lighting fixture for Buildings with different switches and outlets and lighting post on roads.
• Monitoring Telephone and data cable lay out in the site and buildings and out-lets for data and Telephone Units.
• Monitoring the installation of Addressable Fire alarm annunciator(Repeater) panel with controls Smoke detectors, Heat detectors, sprinkler head, Beam detectors and HVAC System(Shut down)and Fire Fighting unit.
• Preparing of work Schedule coordinating with consultants and sub- contractors
• Inspecting the precautionary measures during erection and installation
• Outdoor lighting with specified fixtures
• Preparing of daily and weekly progress report

1. Organization : Hi-Power Electrical Industries, Hyderabad
Position : Testing Engineer
Duration : April 2004 till September 2005.

Responsibilities:

Work involved in Testing and QC of various ranges of Distribution transformers.

• Conducting Routine Test for transformers 15KVA,16KVA,25KVA,
63KVA, 100KVA
• Performing Calculation on losses involved in short and open circuit tests
• Detection of breaking point of oil before using in transformers
• Detection of fault and troubleshooting it
• Heat run test or temperature rise test for transformer
• Detection of incoming material quality
• Preparing of monthly and weekly work schedule for success and smooth execution of job
• Reviewing of weekly/monthly progress reports

2. Organization : Transcon Industries, Hyderabad
Position : Testing Engineer
Duration : September 2002 till March 2004

Responsibilities:

Work involved in Testing and QC of various ranges of Distribution transformers.

• Conducting Routine Test for transformers 10KVA,16KVA,25KVA,
63KVA
• Performing Calculation on losses involved in short and open circuit tests
• Detection of breaking point of oil before using in transformers
• Detection of fault and troubleshooting it
• Heat run test or temperature rise test for transformer