Last Updated: 1st July 2017 (over 5 years ago)



Phone Number


Age Range
35 to 44

Qualification Level

English, Hindi


CompEx certified and Diploma in Electronics and Process Control Instrumentation with more than 17 years of work experience in Instrument Commissioning and Inspection. Worked on various work environments such as Oil & Gas, Refinery and Petrochemical, Power plants both Onshore and Offshore. Able to lead and perform Construction, Pre-Commissioning, Commissioning, Start-up. Maintenance and Shut down Operations. Able to read and interpret Analog and Digital Logic diagram, Schematic diagram, Loop diagram and P&ID’s. Capable of preparing commissioning test procedures, MC & PC packages, evaluate technical proposals and review documentations of loop packages, materials and equipment



   Jun 1991
— Jul 1994

Trainings and Seminar

 ATEX /IEC Comp Ex certified Inspector (JT limited UK) from K2 training centre, Singapore

Brunei Asia Pacific Shell Learning Hub
 Certified First Aider valid until 2017, St. John, Australia
 ESR (Electrical Safety Rules)
 CEHA (Certified Equipment for Hazardous Area)
 Integrated safe system of work (ISSOW)

MEGAMAS Training Company SDN BHD Negara Brunei Darussalam

 TROPICAL BOSIET/FOET with EBS and further travel safely by Boat OPITO Approved Cert No: 592810081513477 (OPITO). Expiry date 09 Aug 2019
 PTW-2 Managing Hazards at The Workplace
 PTW-1 Permit to Work for Supervisors
 IMS-2 HSE Familiarization for Supervisors
 IMS-4 Managing HSE
 IMS-5 Competent Frontline Worksite Supervisor
 Defensive Driving
 SCADA & PLC (Allen Bradley) training from Prolific Ltd, Baroda, India
 PTW: Japan Gas Corporation (JGC, Qatar)
 H2S/BA, HUET & Sea Survival from ENERTECH, Qatar.
 H2S/B A course conducted from Qatar International
 Sea Survival course from Shipping Corporation of India

Diploma in Electronics & Instrumentation Engineering
Electronics Radio & TV Engineering
Pursuing B.TECH Electronics & Telecommunication Engineering from Karnataka Open University



   Nov 2011
— Oct 2016

Experience of planning and reporting with the ability to assess effectiveness of working
Practices with a view to continuously improving systems, personal and team performance
 Writing of commissioning test procedures, understand and follows all safety procedures/rules of a plant including the permit to work system as per SHELL standard
 Participate in all the HSE inductions and trainings including IIF/JSA/HAZID/HAZOP
 Assigned as a Permit to Work (PTW) supervisor
 Responsible in conducting tool box talk prior to commence daily activities
 Assigned in the systemization of Instrument and Electrical commissioning scope for
Various projects
 Experience in GoCCMS (Go Certification and Completions Management System)
 Attend Factory Acceptance Tests as requested by the project team
 Responsible in the review and preparation of work packages (MC and PC packs
 Responsible for the preparation of the Commissioning Test Procedure for various
Systems such as Process Control System, Instrument Gas System, Gas Lift System,
Flares and Vents System, Instrument Air Compressor System, etc.
 Performed Site Acceptance Test (SAT) for various systems for various projects.
 Participate in the scheduling of Vendor’s mobilization and assignments
 Supervise contractors on the Mechanical Completion stage of the project.
 Responsible for the final inspection of all the instrument systems prior to pre-
Commissioning and commissioning including low voltage electrical systems
 Lead/Supervise group of technicians during pre-commissioning, dynamic
Commissioning and start up.
 Interface with Engineering, Construction engineers regarding certification matters
 Assigned in the monitoring and control of the DCS , including Simulations and I/O logic forcing
 Assist in the pre-commissioning of Electrical systems such as Switch Boards and
Distribution Boards and in trouble-shooting of Pump Motors and Fan Motors
 Performed Cause and Effect testing for Process and Fire and Gas system
 Responsible in the reporting of activities, concerns and issues to the Project Lead.
 Assist and supervised contractors for the punch-list clearing
 Participate in the Hand Over Activities to Operations
 Performed HSE walk down/visits in other projects/platform
 Monitor progress and electrical and instrumentation installation of all equipment, module inspection and testing activities
 Perform Electrical and Instrumentation inspections on Ex equipment in accordance with IEC 60079 requirements.
 Emerson Delta V, FFDCS & IPS system, Honeywell, Foxboro system


   Sep 2010
— Sep 2011

 Installation & Commissioning of RTU (DATAC) wellhead control panel (PETRONASH)
 Calibration and testing of Instruments
 Interface with the existing system and commissioning of the same
 Ensure work is performed in accordance with project scheduled requirement
 Site survey, coordinate with in -house engineering team for the preparation of engineering documents
 Preparation of SPIR, as built drawing and closeout report

Company: PUNJLLOYD Ltd
Position: Senior Instrumentation Engineer
Period: 10- 2008 to 09 -2010
DEC: Akersolutions. PMC: EIL, LURGI India Ltd, TOYO Engineering
Projects: EPCC Projects (IOCL Refinery Project in India)
Main Responsibilities;
 Managing and leading team members, allocating resources among team members
 Monitoring work progress and ensuring quality work,
 Ensure all interfaces (inter-discipline, client, implementation, fabrication, vendor, etc.) are identified and managed in the execution of all projects
 Work proactively with the team to resolve issues
 Support Commissioning team and commissioning process
 Manage assigned work to meet project needs proactively work with other team members to ensure project goals are met.
 Monitor the construction activities and provide guide and steer to the construction teams to ensure that systems are completed in logical order and in time for a smooth commissioning period and quick start up.
 Calibration of various field instruments such as safety valves, control valves, transmitters (field bus and HART) etc
 Various vendor packages such as hydro cracking unit and hydrogen generation unit reciprocating compressors, N2 compressors unit and pumps.
 Installation of orifice plate, annubar, flow nozzles, venturi tubes, skin type and multivariable thermocouples, radar type level and flow transmitters, control valves, on/off, shutdown valves and safety valves etc
 Installation of cable tray, cable laying IS –Non IS, junction box, impulse line hook up as per piping specification and Installation of field instruments, glanding and termination
 Loop checking, functional test, Trip Interlock checking
 pre-commissioning and commissioning of vendor packages and field instruments
 Manage a Flawless Project Delivery team focused on testing activities.
 DCS Honeywell Experion, IPS Triconix and Yokogawa RS-3 System

Company: ACEC for DOLPHIN ENERGY, Refinery project in Qatar
Position: Senior Instrument Technician (Commissioning)
Period: 05-2007 to 07-2008
Projects: Dolphin Energy Upstream Project Train I & II, commissioning & start up assistance
Main Responsibilities;
 Commissioning & Start-up assistance
 Works with Instrument and control system related to process compressors, boilers, export pumps and gas fired heaters.
 Checking the calibration and setting up the configuration of several instruments
 Calibration and commissioning of various field instruments such as pressure, flow, level( DP, Displacer, Ultrasonic etc, Various type control valves (masonelian SVI 11, fisher DVC 6000, Flowserve, and CCI on/off valves, pneumatic and hydraulic valves (Biffi, Dresser Ledeen), vibration probes (Bentley Nevada)
 Handling maintenance and troubleshooting activities during and after the performance tests
 Honeywell Experion (DCS), IPS Triconex and Allenbradly (PLC)

Company: AKER KAVERNER POWER GAS, BASF project in India
Position: Instrument Engineer
Period: 07-2006 to 04-2007
Project: EPCC project, BASF Mangalore
Main Responsibilities;
 Supervise, directs and monitor the construction activities and provide guide and steer to the construction teams to ensure that systems are completed in logical order and in time
 Calibration, installation and commissioning of process control instruments.
 Review drawings/ Specifications
 Scheduling/ assigning work to the instruments personnel
 Installation of cable tray, cable laying, junction box, impulse line hook up and Installation of field instruments, glanding and termination
 Loop checking, functional test, Trip Interlock checking
 Monitoring work progress and ensuring quality of work.
 Reports on proper completion of jobs for the preparation of work completion certificates and verify
 DCS Honeywell Experian, PLC HIMA

Company: IMCO for Kuwait National Petroleum Company (KNPC), Kuwait
Position: Senior Instrument Technician
Period: 07- 2005 to 06 -2006
Project: KNPC, Mina Abdullah Refinery
Main Responsibilities;
 Maintenance works at Carry out calibration, installation, trouble shooting and maintenance, repair and testing of Field instrument
 Servicing instruments including replacing faulty parts and testing
 Calibration of Power Generator Turbine control instruments, troubleshooting and control problems

Company: KSRC for Kuwait Oil Company, Kuwait
Position: Senior Instrument Technician
Period: 07- 2001 to 01-2005
Project: KOC
Main Responsibilities;
 Maintenance works at various Gathering Centres
 Carry out calibration, installation, troubleshooting and maintenance, repair and testing of field instruments
 Receive and discusses work assignments with Instrument Engineer/operations
 Carry out the job in a safe manner with minimum or no downtime as per Permit to work system
 Work with Instrument and control system related to Instrument air compressors, process compressor, gas turbines, fired heaters, de-salters unit
 Honeywell TDC 3000 & Foxboro I/A series, Rosemount RS-3 (DCS) and PLC base control system (HIMA)

Company: UB Engineering for Bechtel, India
Position: Senior Instrument Technician
Period: 06-2000 to 06-2001
Project: Enron project, 750MW Combined cycle power plant
Main Responsibilities;
 Pre-commissioning, Commissioning & start-up assistance
 Assisted in the power up of MARK V control panel and loop simulation check of all the Analogue and Digital input to the Mark V
 Calibration of the MS 9001FA+e Gas Turbine accessory system Instruments
 Carried out the Loop Checking activities for F&G and field instruments
 Performing the sensor GAP adjustment for Bentley Nevada vibration elements and & vibration transmitters (Axial, Radial, and Kayphaser)
 Checking the calibration and setting up the configuration of several instruments
 Calibration of various Control Valves (DVC 5000).

Company: AL- KULAIB for Mitsubishi, Kuwait
Position: C & A Technician
Period: 11-1997 to 01-2000
Project: MEW Project 300MW X 8 Unit SABIYA, Power project,
Main Responsibilities;
 Pre-commissioning and commissioning
 Assigned in testing data acquisition systems (DAS/DCS), DAS I/O Testing
 Loop checking, functional test, Trip Interlock checking, module calibration (I/O cards) and field instruments calibration
 Commissioning of various pumps, turbine control and monitoring instruments
 Pre- commissioning, commissioning and start -up activities

Search Jobs by Industry