majoring in Electronics Engineering.

- Commissioning, Start Up, Normal operation of Siemens Gas turbine SGT-400
- Optimize transition period from start up phase to normal operation phase.
- Conduct development training to operator trainees for support Angolanization program
- To plan, prepare & implement procedures for plant commissioning, test runs & normal operation.

- Pre commissioning, Commissioning, Start Up, Normal operation, Walk Down, Tracing the line, Punch list, water flushing, air blowing, special/chemical cleaning, function test, field inspection, loop checking, refractory dry out, initial startup and review the procedure of all units of OSBL including power generation and distribution, start up & fuel gas systems, hot oil systems, closed cycle cooling water system, plant/instrument air systems, fire water systems, Water and Waste Water Treatment Plant, Feed gas receiving, slug catcher, pig receiver, condensate stabilization systems, Flares systems, Ethylene/Propane refrigerant storage, Defrost gas systems, AGRU (Acid Gas Removal Unit), Dehydration and Mercury removal.
- Optimize transition period from start up phase to normal operation phase.
- Conduct development training to operator trainees for support Angolanization program.

- Operation of the Utility Plant Equipment consisting of Furnace Boilers (Mitsubishi & Macchi/12 bar/60 ton per hour), Gas Turbine Generators (GE Frame#6/Mark V/31 MW each) and Electrical Distribution systems. Various auxiliary systems such as; Air Instrument Compressors Systems, Nitrogen Plant, Water Treatment Plant (Desalination, Remineralization and Demineralization), Waste Water Treatment Plant (Degasser, demulsifier, Oil skimmer and Sanitary Package), Sea water intake, Fresh cooling water system, Sea cooling waters chlorinating system, Fire fighting system, Flare Systems and fuel gas systems.
- Assist LNG train during shutdown activities in a safe manner. And assist DCS Operator as required.
- Actively involved in emergency drill.
- Directly involved for implements Electronic PTW Q4 (pilot project in Qatar Gas Company).

Commissioning, Start up and Operation of 6 Units Gas Turbine (GE frame #6/Mark V/dual fuel/31 MW each), 6 units HRSG (Stork Ketels/65 bar/525oC/60 ton per hour each), 2 units Steam Turbine (Mitsubishi/62 MW each), Electrical distribution with 150kV main bus bar (switch yard), WTP, Demineralized Water Plant, Air Compressors, Fire fighting systems.
- Report to Operation Supervisor, especially for abnormal condition of instrument.
- Control visual condition at site of all equipment.
- Monitoring Electrical measurement.
- Analyzing a failure to identify that investigation their cause.
- Checking progress of maintenance’s work.
- To plan, prepare & implement procedures for plant commissioning, test runs & normal production.