Versatile Process Engineer


Last Updated: 14th December 2018 (over 3 years ago)

Address
Nigeria

E-mail
Locked

Phone Number
Locked

Gender
Male

Age Range
45 to 54

Qualification Level
Other Post Graduate

Languages
English

Summary

JUBOB KEYSTONE ENGINEERING NIGERIA LIMITED (JKENL)
PPRH, UGBOWO-BENIN, EDO STATE (Aug., 2018 – Nov., 2018)
Lead Process Engineer
• Job Description
Lead Process Engineer for the execution of the Nigerian Petroleum Development Company Limited (NPDC) OML 111 – Feasibility Studies and FEED for the Rehabilitation and Upgrade of OREDO Flow Station and Associated Facilities Project:
■ Conceptual Studies on:
• Crude Oil Inlet Study; ● Crude Phase Separation;
• Crude Oil Reid Vapour Pressure; ● Export Conditions;
• Gas Dehydration; ● Gas Dew Pointing Control;
• Crude Oil Storage; ● Produced Water handling;
• Instrument Air systems ● Power Generation Gas Supply;
■ FEED for the Provision of additional Processing facilities and Rehabilitation & Upgrade of OREDO Flow Station and Associated Facilities Project;
Activities involved Coordination and supervision of process discipline design activities; MDR preparation & update; Project meetings & presentations; Process Simulation, Heat and Material balances, Process Flow Diagrams (PFDs), Piping and Instrumentation Diagrams (P&IDs), Utility Flow Diagrams (UFDs), Utility and Instrumentation Diagrams (U&IDs), Process Equipment Sizing (Pumps, Crude Oil Stabilization Column, Compressor, Gas Scrubber, Aircoolers & Storage Tanks), Process Control and Pressure Safety Valves Sizing, Process Instrument Data sheets, Line Sizing, Line Schedule and Valve List documentation.

NIGERIAN ENGINEERING & TECHNICAL COMPANY LTD (NETCO)
23 ENGINEERING CLOSE, OFF IDOWU TAYLOR,
VICTORIA ISLAND, LAGOS (May, 2018 – July, 2018)
Senior Process Engineer
• Job Description
Senior Process Engineer for the execution of the FEED and EPCI Cost Estimates for the Replacement of Crude and Products Pipelines and Depot Upgrade Project for Nigerian Product and Storage Company Limited (NPSC, subsidiary of) NNPC Export Gas Pipeline Project:
■ As-Built Documentation Campaign;
■ FEED

SUMBRIRO ENGINEERING & TECHNICAL COMPANY LTD
PLOT 213B CORPORATION DRIVE, DOLPHIN ESTATE,
IKOYI, LAGOS (June 2014 – May, 2018)
Senior Process Engineer/Project Engineer
• Job Description
Lead Process Engineer for:
Prime Energy and production Limited Asaramatoru Flowline and Pipeline Project;
Nigeria Petroleum Development Company Limited (NPDC) Oredo Flow station Produced (Oily) Water Treatment Facility Projects:
■ Conceptual Definition Study
■ FEED for Nigeria Petroleum Development Company Limited (NPDC) Oredo Flow station Produced (Oily) Water Treatment Facility Projects
Activities involve Process Flow Diagrams (PFD’s), Piping and Instrumentation Diagrams (P&IDs), Control Valves Sizing, Process Instrument Data sheets, Line Sizing, Line Schedule, Equipment List, Tie-in Schedule& Valve List documentation, Process Equipment Sizing, Process Operating Philosophy and Utility Study Report documentation, Process Hazard Analysis Review Session and PHA Report documentation.

PRIME & HILLSENERGY SERVICES LTD
LEKKI-EPE EXPRESSWAY, LEKKI, LAGOS (June 2013 – May, 2014)
Senior Process Engineer (seconded to NETCO)
• Job Description
Senior Process Engineer for Chevron Nigeria Limited (CNL) Projects:
■ Facilities Information Management
Activities involve: As-built documentation of Parabe Production Platform Process Flow Diagrams (PFD’s), Piping and Instrumentation Diagrams (P&IDs), Line Schedule, Equipment & Valve List documentation, SAFE Chart documentation;
Redline Markup of FSO Cargo Facility Piping Schematic drawings to facilitate the preparation of Process Flow Diagrams (PFD’s) and Piping Instrumentation Diagrams (P&IDs). As-built Verification Site Visit Report documentation
■ FEED & Detailed Engineering Design of Robertkiri Gas Project (Robertkiri Production Platform and Idama Mobile Offshore Production Unit)
Activities involve Process Simulation, H&MBs, Process Flow Diagrams (PFD’s), Piping and Instrumentation Diagrams (P&IDs), Process Control and Pressure Safety Valves Sizing, Process Instrument Data sheets, Line Sizing, Line Schedule, Equipment List, Tie-in Schedule& Valve List documentation, Process Equipment Sizing and Capacity Verification, SAFE Chart documentation, Process Operating Philosophy and Utility Study Report documentation, Process Hazard Analysis Review Session and PHA Report documentation.

JUBOB KEYSTONE ENGINEERING NIGERIA LIMITED (JKENL)
PPRH, UGBOWO-BENIN, EDO STATE (April 2013 – June 2013)
Lead Process Engineer
• Job Description
Lead Process Engineer for the Nigerian Petroleum Development Company Limited (NPDC) Conceptual Studies and FEED for the Construction of Crude Oil Buffer Storage Tanks at OML’s 26, 30, 34 and 42.
■ Activities involve Process Simulation, Heat and Material balances, Process Flow Diagrams (PFD’s), Utility Flow Diagrams (UFS), Piping and Instrumentation Diagrams (P&IDs), Process Equipment Sizing (Pumps & Storage Tanks), Process Control and Pressure Safety Valves Sizing, Process Instrument Data sheets and Line Sizing, Line Schedule & Valve List documentation.

BIOSHEED NIGERIA LTD., IJAIYE-OGBA, LAGOS (August 2011 – April 2013)
Senior Process/Project Engineer
• Job Description
Provision of Project Construction supervision and management services; Review of installation/shop drawings and Procedures; Review of Procurement requisitions, Vendors documents/drawings;

ASPIN INTERNATIONAL LTD., Port Harcourt (June 2006 – July 2011)
Process Engineer
• Job Description
Process Engineer for conceptual and detail engineering design of the diesel receiving, storage and dispensing facilities for the proposed Nigerian Bottling Company (NBC) Fuel Inspection & Design project;
SPDC’s Awoba NAG, Ekulama II Surge Vessel Gas Gathering, Nembe-1 Electricity Interdependency Projects:
Calculation of material & heat balances and the creation of block flow diagrams, process flow diagrams (PFDs), utility balance diagrams (UFDs), piping and instrumentation diagrams (P&IDs).
Developing process design basis, process specifications, data sheets, equipment list, line & valve lists, control and pressure safety valves calculations and project manning and scheduling.
Chemical design of Oil & Gas facilities using design softwares (Hysys, Pro II)
Design of Large Scale Industrial structures
Review of installation/shop drawings and Procedures; Provision of Project Construction supervision and management services; Review of Procurement requisitions, Vendors documents/drawings;

CAKASA NIGERIA LIMITED, Port Harcourt (June 2005 – April 2006)
Alternate Site Manager (Contract)
• Job Description
Chevron EGP TAM Molecular Sieves Change-Out
Daily Progress Report Meeting with the Chevron EGP TAM Team
Co-ordination/Supervision of the overall site activities on the EGP TAM Molecular Sieves Change-Out project

PINE OIL AND GAS LIMITED, Warri – DeltaState (June 2000 – June 2005)
Construction Site Manager,
• Job Description
Contract bids/tender preparations, estimation/compilation for Oil and Gas Companies e.g. NNPC - PPMC, NNPC – NGC, NNPC – WRPC & SPDC
Project evaluation, planning and Management of different projects from the bidding stage, defence of project proposal through execution of project
Supervised:
System 2C GMT Piping Modification Works at NNPC - PPMC Warri Pump Station (April, 2003)
Repair of 16" NNPC – PPMC Warri-Benin Trunkline at Oregha River South Bank
Clearing of Sludge on NNPC – NGC Condensate Line
Repair of Umah Village Road connecting NPA Port - Warri Refinery Expressway to NNPC – NGC TGS, Ekpan
MICROTECH ENG. SERVICES LTD, Warri – Delta State (June 1999 – June 2000)
Procurement Engineer,
• Job Description
Preparation of Terms and Conditions of Contracts for Technical procurement of oil and gas package equipment.
Review of Requisition Documents, Technical & Functional Specifications, Datasheets, etc for package equipments.
Review of Procurement Technical Tenders and Tender Evaluations
Development and implementation of sales /marketing policies
Development of sales proposals to meet specific/projected customer needs
Provision of Client oriented services in the areas of installation, preventive and corrective
Maintenance of computers - hardware, software and accessories
Customer Relations Management and Customer Support Services

PYTHON ENGINEERING NIG. LIMITED, Warri, Delta State (Feb. 1996 - Sept. 1997)
Logistics Supervisor,
• Job Description
Co-ordination of inventory of company equipment and machineries.
Supervised the assignment of machineries for specific tasks;
Supervised the assignment of personnel to various company tasks; supervised equipment and machineries spares parts purchase and stock management

NNPC - PPMC Satellite Depot, Ejigbo – Lagos State (April. 1992 – Oct. 1992)
(SIWES – Corrosion Technologist)
• Job Description
Monitoring and Maintenance of Corrosion Prevention Equipment: TEG Stations & Transformer Rectifiers; Pipeline and Steel structures Corrosion Monitoring and Prevention; Pipeline Repairs by clamping, point weld, sleeve welding and section replacement
Petroleum Products Sampling (AGO, DPK and PMS) to ensure products are within specification and fit for purpose; Petroleum Products Stock Tank Dipping and Stock Inventory
Reception and Storage of Off-Spec Products in the Slop Tank&Blending of Off-Spec Products
Preparation of Laboratory Products Samples Report & submission to the Assistant Depot Manager,
Ejigbo Depot & Co-ordination of Laboratory Activities with the NNPC - PPMC Mosimi Area Office Quality Assurance Department

TRAININGS ATTENDED
Basic Fire Fighting April, 1995
NNPC – PPMC Area Office, Warri
Effective Sales/Marketing Strategy for Sales Engineers July, 1999
Microtech Eng. Services Limited, Warri
HSE Seminar June, 2002
Pine Oil and Gas Ltd
STOP for Supervisors February, 2006
Chevron Nigeria Limited
At-Risk-Behaviours (ARB) February, 2006
Chevron Nigeria Limited
Safety Leadership Expectations Workshop (SLEW) February, 2006
Chevron Nigeria Limited
Drug & Alcohol Policy March, 2006
Chevron Nigeria Limited
ISO 9001:2000 Foundation Course
(QMS Awareness Training) August, 2007
Aspin International Limited
Introduction to Internal Auditors Course Sept, 2009
Bureau Veritas Nigeria Limited

Education

University of Benin
Postgraduate Diploma

   Oct 1996
— Aug 1998

Chemical Engineering

University of Lagos
Bachelor of Science

   Sep 1988
— Aug 1994

Industrial Chemistry

Ad
Ad
Ad